2016 Kenworth W900 Fluid Type Specs
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2016 Kenworth W900? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Fluid | Type/Spec | Capacity (approximate) |
|---|---|---|
| Engine Oil | API CK-4 or FA-4, SAE 15W-40 | 48 US Quarts (Paccar MX-13) |
| Engine Coolant | Conventional or OAT ELC, CAT EC-1 | 10-12 US Gallons |
| Transmission Fluid | Eaton PS-164 Rev 7, SAE 50 Synthetic | 13.5-17.5 US Quarts |
| Rear Differential | SAE 80W-90, API GL-5 | 20-30 US Pints each |
| Power Steering | Allison C-4, Dexron III, or CAT TO-2 | 3-4 US Quarts |
| Brake Fluid | DOT 3 or DOT 4 | As required |
| DEF (Diesel Exhaust Fluid) | ISO 22241-1 | 15-25 US Gallons |
| Washer Fluid | All-season washer fluid | 1-1.5 US Gallons |
Engine Oil
For the 2016 Kenworth W900, equipped with engines such as the Paccar MX-13 or Cummins ISX, the engine oil specification is crucial for longevity and performance. The primary recommendation is an API CK-4 or, for certain engines, API FA-4 rated oil. These specifications are designed for modern diesel engines with exhaust aftertreatment systems.
The most common viscosity grade is SAE 15W-40, offering robust protection across a broad range of operating temperatures. Some manufacturers may allow for SAE 10W-30 or 5W-40 in specific climates or for improved fuel economy, but always verify this in your owner's manual or OEM service information for your specific engine.
Capacity: The Paccar MX-13 engine typically holds around 48 US Quarts (12 gallons) of engine oil. Cummins ISX capacities can vary, so always check the dipstick and owner's manual.
Intervals: Oil change intervals for heavy-duty trucks can vary significantly based on engine type, duty cycle, fuel quality, and oil analysis results. Common intervals range from 25,000 to 50,000 miles, or more, especially with extended drain formulations and regular oil analysis. Refer to your engine's maintenance manual for precise recommendations.
Common Pitfalls: Never use an oil that does not meet the API CK-4 or FA-4 specification. Using older API ratings can lead to premature wear, reduced aftertreatment system efficiency, and potential warranty voidance. Avoid mixing different oil types or brands if possible, and always ensure adequate fill levels.
Engine Coolant
The 2016 Kenworth W900 typically utilizes a heavy-duty engine coolant, either conventional (fully formulated) or an OAT (Organic Acid Technology) Extended Life Coolant (ELC). Many engine manufacturers, such as Caterpillar (CAT EC-1), Detroit Diesel (DDC Power Cool Plus), or Cummins (CES 14603), have their own specifications.
Type/Spec: For conventional coolants, a fully formulated, low-silicate, phosphate-free coolant with Supplemental Coolant Additives (SCAs) is typically required. These are often green or blue. For ELC coolants, OAT formulations (often red, orange, or purple) are prevalent, offering longer service life and superior cavitation protection. Always refer to your engine
More specs for the 2016 Kenworth W900
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2016 Kenworth W900 Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.