Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Factory Maintenance Schedule

    2017 Nissan Frontier Factory Maintenance Schedule

    Keep your 2017 Nissan Frontier running strong with this comprehensive factory maintenance schedule, including severe-duty adjustments and common issues by mileage.

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2017 Nissan Frontier? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick reference

    MileageServiceNotes
    5,000Oil & Filter Change, Tire RotationNormal duty schedule.
    10,000Oil & Filter Change, Tire RotationNormal duty schedule.
    15,000Oil & Filter Change, Tire RotationInspect drive belts, brake pads, lines, hoses.
    Cabin Air Filter Replacement
    30,000Oil & Filter Change, Tire RotationReplace engine air filter. Inspect fuel lines and connections.
    Brake Fluid FlushEssential for ABS system longevity.
    Differential Fluid ServiceIf equipped and for 4x4 models.
    Transfer Case Fluid ServiceIf equipped and for 4x4 models.
    60,000Oil & Filter Change, Tire RotationReplace spark plugs. Inspect PCV valve. Inspect accessory belt.
    Transmission Fluid ServiceRefer to owner's manual for specific type and interval.
    Coolant Flush
    100,000Oil & Filter Change, Tire RotationInspect timing chain (no replacement interval).
    Replace PCV valveIf not replaced at 60,000 miles, or if excessive oil consumption.
    150,000Oil & Filter Change, Tire RotationRepeat all applicable 30,000-mile services.

    This schedule is a general guideline. Always refer to your 2017 Nissan Frontier owner's manual for the most accurate and detailed maintenance information specific to your vehicle's trim and usage.

    Severe-duty schedule

    Nissan recommends a more rigorous maintenance schedule for vehicles operated under severe conditions. These conditions include:

    • Frequent short trips (under 5 miles): Especially in cold weather, this prevents the engine from reaching optimal operating temperature and burning off moisture.
    • Towing a trailer or using a roof rack: Adds extra strain on the engine, transmission, and brakes.
    • Driving on dusty, muddy, or unpaved roads: Leads to accelerated wear of filters and other components.
    • Extended periods of idling or low-speed driving: Common in heavy city traffic.
    • Driving in extremely cold climates: Puts extra stress on fluids and battery.

    If your 2017 Nissan Frontier falls under any of these categories, consider the following adjusted intervals:

    • Oil & Filter Change: Every 3,750 miles or 3 months.
    • Tire Rotation: Every 3,750 miles or 3 months.
    • Engine Air Filter: Inspect every 15,000 miles, replace every 15,000-30,000 miles or more frequently as needed.
    • Cabin Air Filter: Inspect every 15,000 miles, replace every 15,000-30,000 miles or more frequently as needed.
    • Differential and Transfer Case Fluid Service: Every 15,000-30,000 miles, especially if towing or off-roading frequently.
    • Transmission Fluid Service: Every 30,000 miles, particularly if towing or driving in stop-and-go traffic.
    • Spark Plugs: Consider replacing at 60,000 miles.
    • Brake Fluid Flush: Every 30,000 miles or 2 years, whichever comes first.

    Always consult your owner's manual for the definitive severe-duty recommendations.

    Known issues by mileage

    The second-generation Nissan Frontier (2005-2021) is generally known for its reliability, but like any vehicle, it has some common issues that owners might encounter at various mileages:

    • Up to 60,000 miles: Some owners have reported issues with the camshaft position sensor or crankshaft position sensor failing, leading to rough idling or stalling. These are relatively inexpensive to replace. Early models of this generation were also susceptible to the

    Need service on your Nissan Frontier?

    Request service from shops in your area.

    More specs for the 2017 Nissan Frontier

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email