2020 Nissan Rogue Key Fob Programming Guide

Quick reference

Step-by-step on-board programming

The 2020 Nissan Rogue does not support DIY on-board programming for its key fob. The vehicle's sophisticated security system, which includes an immobilizer, requires specialized equipment to program new keys.

You will need to visit a Nissan dealership or a qualified automotive locksmith to have a new key fob programmed. They use diagnostic scan tools to communicate with the vehicle's computer and sync the new fob to your car.

Battery replacement

1. Locate the small release button or switch on the side of your key fob. Slide or press it to release the emergency key blade. Pull the key blade out.
2. With the emergency key blade removed, you'll see a small slot or notch in the key fob casing. Insert a small flathead screwdriver or a coin into this slot and gently pry the two halves of the fob apart.
3. Carefully separate the two halves. You will see the circuit board and the battery (a CR2032 coin cell).
4. Note the orientation of the old battery (usually positive side up). Gently pry out the old battery using a small non-metallic tool or your fingernail.
5. Insert the new CR2032 battery with the positive (+) side facing up.
6. Align the two halves of the key fob and snap them back together firmly until you hear a click.
7. Reinsert the emergency key blade.

Where to buy a replacement fob

• Nissan Dealership: This is the most reliable option for genuine Nissan parts, but also typically the most expensive. You're guaranteed a compatible fob, and they will program it for you. Expect to pay $200 - $400 or more for the fob and programming.
• Automotive Locksmith: A qualified automotive locksmith can often provide and program a new key fob for less than the dealership. They use similar diagnostic tools and can sometimes offer aftermarket fobs that function identically to OEM ones. Plus, they can often come to your location. Expect to pay in the range of $150 - $300.
• Online Retailers (e.g., Amazon, KeylessOption.com, RemotesUnlimited.com): You can often find genuine OEM or high-quality aftermarket key fobs online for a significantly lower price (e.g., $50 - $100 for the fob alone). However, you will still need to pay for programming services from a dealership or locksmith, and for cutting of the emergency key blade. Be very careful to ensure the FCC ID and part numbers match your original fob to avoid incompatibility.

If on-board programming isn't supported

As mentioned, the 2020 Nissan Rogue requires professional programming. This is due to its advanced security system, which includes an immobilizer. The immobilizer system uses a transponder chip embedded in the key fob (in this case, often integrated into the circuit board itself) that communicates with the vehicle's engine control unit (ECU). If the correct transponder code isn't recognized, the car won't start, even if the key physically turns the ignition (if applicable) or the remote functions work. Programming essentially involves teaching the car's computer to recognize the unique digital signature of your new key fob's transponder.

Cost expectations: As detailed above, expect to pay between $150 and $400, depending on whether you go through a locksmith or a dealer, and whether you provide your own fob.

Find a mobile locksmith or shop on Repairius.