2017 Nissan Rogue Key Fob Programming Guide

Quick reference

Step-by-step on-board programming

Unfortunately, the 2017 Nissan Rogue does not support DIY on-board programming for its key fobs. This means you won't be able to program a new key fob yourself simply by following a sequence of button presses or ignition cycles.

Instead, programming a new key fob for your 2017 Nissan Rogue requires specialized diagnostic equipment to access the vehicle's onboard computer. This is typically done by a locksmith or a Nissan dealership.

Battery replacement

Replacing the battery in your 2017 Nissan Rogue key fob is a straightforward process:

1. Locate the small release button or switch on the side of the key fob. Press or slide it to release the integrated emergency key, then pull the emergency key out.
2. With the emergency key removed, you'll see a slot. Carefully insert a small flat-head screwdriver or a coin into this slot and gently twist to pry the two halves of the key fob apart.
3. Once opened, you'll see the CR2032 coin cell battery. Note its orientation (positive side up).
4. Gently pry out the old battery and insert a new CR2032 battery, ensuring the positive side is facing up.
5. Align the two halves of the key fob and press them firmly together until they click into place.
6. Reinsert the emergency key.

Where to buy a replacement fob

When it comes to purchasing a replacement key fob for your 2017 Nissan Rogue, you have a few options, each with its pros and cons:

• Nissan Dealership:

  • Pros: Guaranteed genuine OEM part, often comes with programming included in the price. They have all the necessary tools and expertise.
  • Cons: Most expensive option. Expect to pay between $200 - $400 for the fob and programming.

• Automotive Locksmith:

  • Pros: Often more affordable than a dealership, especially for the programming service. Many mobile locksmiths can come to you, saving you a tow. They carry both OEM and quality aftermarket fobs.
  • Cons: Quality of aftermarket fobs can vary; ensure the locksmith uses reputable brands. Prices for the fob and programming typically range from $150 - $300.

• Online Retailers (e.g., Amazon, eBay):

  • Pros: Most budget-friendly option for purchasing the physical fob itself. You can find both OEM and aftermarket options at significantly lower prices (e.g., $30 - $70 for the fob).
  • Cons: You still need to pay for programming separately (unless you have a locksmith tool yourself). Be wary of counterfeit or low-quality fobs. Ensure the FCC ID (CWTWB1U825, CWTWB1U840) matches your original. The integrated key blade will also need to be cut by a locksmith or hardware store with the right equipment (additional cost, usually $50 - $80).

If on-board programming isn't supported

Since the 2017 Nissan Rogue requires a scan tool for key fob programming, you'll need to factor in the cost of a professional service. As mentioned above, a locksmith or dealership will be your go-to. The total cost will include:

• The key fob itself: Prices vary based on where you purchase it (see "Where to buy" section).
• Programming service: This can range from $70 to $150, depending on the provider and your location.
• Key blade cutting (if applicable): If your new fob comes with an uncut integrated key, a locksmith will need to cut it to match your existing key. This ensures you can manually unlock the doors if the fob battery dies. This typically costs $50 - $80.

Immobilizer Transponder: The 2017 Nissan Rogue uses a transponder chip embedded within the key fob. This chip communicates with the vehicle's immobilizer system, which prevents the car from starting if an unprogrammed key is used. When a new key fob is programmed, the transponder chip is also paired with the vehicle's immobilizer system, allowing the car to start. This is a critical security feature and another reason why specialized equipment is needed for programming.

Find a mobile locksmith or shop on Repairius.