Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Transmission & Axle Gear Ratios

    2020 Ram 2500: Transmission & Axle Gear Ratios

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2020 Ram 2500? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Transmission Gear Ratios

    The 2020 Ram 2500 comes with two available transmissions, an 8-speed automatic for the gas engine and a 6-speed automatic for the diesel.

    8HP75-LCV 8-Speed Automatic (6.4L HEMI V8)

    GearRatio
    1st4.71:1
    2nd3.14:1
    3rd2.10:1
    4th1.67:1
    5th1.29:1
    6th1.00:1
    7th0.84:1
    8th0.67:1
    Reverse3.30:1

    68RFE 6-Speed Automatic (6.7L Cummins Turbo Diesel)

    GearRatio
    1st3.23:1
    2nd1.84:1
    3rd1.41:1
    4th1.00:1
    5th0.82:1
    6th0.63:1
    Reverse4.44:1

    Available Axle Ratios

    RatioAvailable WithAxle CodeBest For
    3.73:1Standard with 6.4L HEMI V8 & 6.7L CumminsDMMBalanced
    4.10:1Optional with 6.4L HEMI V8 & 6.7L CumminsDMHTowing

    How to Identify Your Axle Ratio

    There are a few ways to determine the axle ratio in your 2020 Ram 2500.

    • VIN Decoder: You can use a VIN decoder to get a full build sheet for your truck, which will include the axle ratio.
    • Axle Tag: Look for a tag on the differential housing. It will have the ratio stamped on it (e.g., 3 73 for a 3.73:1 ratio).
    • Window Sticker: If you have the original window sticker, the axle ratio will be listed under the optional equipment section.

    Towing vs. MPG Impact

    The axle ratio has a significant impact on both towing performance and fuel economy.

    • Numerically Lower Ratios (e.g., 3.73): These are better for fuel economy as the engine turns at a lower RPM at highway speeds.
    • Numerically Higher Ratios (e.g., 4.10): These are better for towing as they provide more torque to the wheels, making it easier to get a heavy load moving.

    Common Issues

    While the 2020 Ram 2500 is a reliable truck, there are a few common issues to be aware of related to the driveline.

    • Ring & Pinion Whine: A whining noise from the rear differential can indicate a problem with the ring and pinion gears. This is often caused by improper backlash or wear.
    • Carrier Bearing Failure: The carrier bearings support the differential carrier. If they fail, you may hear a rumbling or grinding noise from the rear end.
    • Limited-Slip Clutch Wear: On trucks equipped with a limited-slip differential, the clutches can wear out over time, leading to reduced traction.

    Find a driveline shop on Repairius.

    Need service on your Ram 2500?

    Request service from shops in your area.

    More specs for the 2020 Ram 2500

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Driving or Managing a Fleet?

    Use Dispatchtool for truck navigation, driver communication, dispatching, and fleet management.

    Visit Dispatchtool
    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email