2015 Subaru Crosstrek Paint Color Codes & Touch-Up Guide

The 2015 Subaru XV Crosstrek is beloved for its rugged capability and distinctive styling. Whether you are driving the eye-catching Tangerine Orange Pearl or the subdued Desert Khaki, keeping your Crosstrek’s paint in top condition is essential for protecting it from rust and maintaining its resale value.

If you are dealing with rock chips from the trail or a door ding from the parking lot, you will need the exact factory paint code to get a proper color match. Below is your complete guide to 2015 Subaru Crosstrek paint codes and touch-up repair.

Quick reference

Here are the factory colors offered for the 2015 Subaru XV Crosstrek and Crosstrek Hybrid models. Always verify your specific code before ordering paint.

Color Name	Paint Code	Type (Solid / Metallic / Pearl)
Crystal Black Silica	D4S	Pearl
Crystal White Pearl	K1X	Pearl
Dark Gray Metallic	61K	Metallic
Desert Khaki	H6Q	Solid
Ice Silver Metallic	G1U	Metallic
Plasma Green Pearl	F9T	Pearl (Hybrid Only)
Quartz Blue Pearl	J8U	Pearl
Sunrise Yellow	C2Z	Solid (Special Edition)
Tangerine Orange Pearl	G2U	Pearl
Venetian Red Pearl	H2Q	Pearl

Where to find your paint code

Subaru makes finding your paint code relatively straightforward, but the location can vary slightly depending on the exact production date and factory.

For the 2015 Subaru Crosstrek, check the following locations:

1. Passenger Side Strut Tower: Open the hood and look on the passenger side strut tower. You will find a metal or vinyl VIN plate. The paint code is clearly labeled as "Color" followed by a 3-digit alphanumeric code (e.g., K1X).
2. Driver’s Side Door Jamb (B-Pillar): Check the placard located on the driver's side door jamb. While this sticker is primarily for tire pressure and VIN data, some Subaru models include the 3-character paint code near the bottom barcode.

If your sticker has faded or you are unsure, you can always call your local Subaru dealership’s parts department. Provide them with your 17-digit Vehicle Identification Number (VIN), and they can look up the exact factory color formulation for your vehicle.

Best touch-up paint sources

Once you have your code, you need high-quality paint to make the repair. Here are the most reliable sources for your 2015 Crosstrek:

• Your Local Subaru Dealer: The easiest way to get an exact match for a small chip is an OEM paint pen from the dealership.
• AutomotiveTouchup: Excellent for larger jobs. They custom-mix paint based on your exact factory code and offer it in bottles, aerosol spray cans, and ready-to-spray pints.
• Dupli-Color: A highly accessible option found at most local auto parts stores. Their "Perfect Match" line is great for standard metallics and solids, and their 2-in-1 scratch fix pens are very convenient.
• Tcoat Custom-Mix: Great for professional-grade touch-up kits that include specialized leveling fluids to make the blob of new paint sit flush with your factory clear coat.

How to use touch-up paint

Fixing a rock chip or small scratch takes patience. Follow these steps for a long-lasting, invisible repair:

1. Clean the area: Wash the panel thoroughly. Use wax and grease remover or rubbing alcohol on a microfiber towel to remove any oils, wax, or road grime from inside the scratch.
2. Apply Primer: If the scratch goes all the way down to bare metal or plastic, apply a tiny drop of automotive primer. Let it dry completely (usually 30 minutes).
3. Apply Base Coat (Color): Shake your paint pen or bottle vigorously. Apply the color in very light, thin layers using a micro-dabber or the provided brush. Do not flood the chip. Allow 15-20 minutes of flash time between coats until the color covers the primer.
4. Apply Clear Coat: The base coat will look dull on its own. Once the color coat is completely dry, apply a layer of clear coat. This provides the UV protection and the glossy finish that matches the rest of the car.

Color matching tips for pearls and tri-coats

Colors like Crystal White Pearl (K1X) and Tangerine Orange Pearl (G2U) are famously difficult to match perfectly. Pearl paints contain microscopic mica flakes that reflect light in multi-dimensional ways.

When applying pearl touch-up paint, the metallic flakes can settle at the bottom of the bottle quickly. Shake the bottle every few minutes during application. Additionally, some pearls are "tri-coats," meaning they require a solid base color, a translucent pearl mid-coat, and a final clear coat. If your paint requires a mid-coat, practice on a piece of scrap metal or cardboard first to see how many layers of the pearl mid-coat are needed to match your factory panel's exact hue. Less is usually more.

Find a trusted body shop on Repairius.