2024 Subaru Forester Fuse Box Diagram & Amperage

Quick Answer

The 2024 Subaru Forester features fuse boxes in three primary locations: under the hood (Engine Compartment Fuse Box), inside the cabin (Driver's Side Dash Fuse Box), and in the cargo area (Rear Cargo Fuse Box).

Engine Compartment Fuse Box

The engine compartment fuse box is located on the passenger side of the vehicle, near the battery. This box contains fuses for major power systems and relays for critical functions. Always consult the diagram on the fuse box lid for the most accurate information for your specific trim.

Relay Locations:

• Starter Relay: Typically located near the starter fuse (F4) in the engine compartment fuse box.
• Fuel Pump Relay: Often found next to the fuel pump fuse (F2).
• Headlight Relays: Individual relays for low and high beams may be present.

Driver's Side Dash Fuse Box

This fuse box is located behind a panel on the driver's side, near the kick panel. It protects many of the interior electrical components and accessories.

Rear Cargo Fuse Box

The 2024 Subaru Forester often includes a fuse box in the rear cargo area, accessible by removing a trim panel. This box typically handles power for rear accessories and sometimes the trailer wiring harness, if equipped.

How to Test a Fuse

Testing a fuse is a straightforward process that can help diagnose electrical issues. You'll need a fuse puller (usually found in your fuse box) and a multimeter or a fuse tester.

1. Locate the fuse: Refer to the fuse box diagram to identify the fuse for the circuit you're troubleshooting.
2. Turn off the ignition: Always ensure the vehicle's ignition is off before removing or inserting fuses.
3. Remove the fuse: Use the fuse puller to carefully extract the fuse from its slot.
4. Inspect the fuse: Visually inspect the fuse. A blown fuse will have a broken wire or a melted connection inside. For opaque fuses, you'll need a tester.
5. Use a multimeter (continuity test): Set your multimeter to the continuity setting (usually indicated by a speaker icon). Touch the probes to the metal terminals on either end of the fuse. If the multimeter beeps, the fuse is good. If it doesn't beep, the fuse is blown and needs replacement.
6. Use a fuse tester: Insert the fuse into the tester. If the light on the tester illuminates, the fuse is good. If not, it's blown.
7. Replace the fuse: If the fuse is blown, replace it with a new fuse of the exact same amperage and type. Never use a fuse with a higher amperage rating, as this can cause severe damage to the electrical system or even lead to a fire.

Common Blown Fuses on This Vehicle

While any fuse can blow, some are more commonly affected due to their circuits' usage or design. On a 2024 Subaru Forester, common culprits for blown fuses often include:

• Cigar Lighter / 12V Outlets: These fuses (F2 in the Dash Fuse Box, F1 in the Rear Cargo Fuse Box) are frequently overloaded by high-draw accessories like phone chargers, portable air compressors, or even faulty devices. If your 12V outlets aren't working, check these fuses first.
• Radio/Infotainment System: Issues with aftermarket head units, short circuits in wiring, or even severe power surges can sometimes cause the radio fuse (F1 in the Dash Fuse Box) to blow, leading to a dead infotainment screen.
• Brake Lights: A blown brake light fuse (F4 in the Dash Fuse Box) can occur due to faulty brake light switches, short circuits in the wiring, or issues with trailer wiring if equipped. If your brake lights aren't working, this is a good place to start.
• Headlights: While less common for modern LED systems, issues with older halogen bulbs or wiring can still lead to a blown headlight fuse. If one of your headlights goes out, check the corresponding fuse (F5-F8 in the Engine Compartment Fuse Box).

Always remember to check the simplest solutions first. If a component isn't working, verify the fuse before assuming a more complex electrical problem.

Find a trusted shop on Repairius.