Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Torque Specifications

    2024 Tesla Model Y Torque Specifications

    Key fastener torque specifications for the 2024 Tesla Model Y, including wheels, brakes, and axle nuts.

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2024 Tesla Model Y? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick Reference

    FastenerTorque (ft-lb / Nm)Notes
    Wheel Lug Nuts129 ft-lb / 175 NmApply to clean, dry threads.
    Brake Caliper Bracket Bolts (Front)133 ft-lb / 180 NmUse new bolts or apply fresh thread locker.
    Brake Caliper Bracket Bolts (Rear)81 ft-lb / 110 NmUse new bolts or apply fresh thread locker.
    Brake Caliper Slide Pins (Front & Rear)22 ft-lb / 30 NmLubricate pins with appropriate grease.
    Axle Nut (Front & Rear)203 ft-lb / 275 NmSingle-use nut; must be replaced if removed.

    Note: As an electric vehicle, the 2024 Tesla Model Y does not have an engine oil drain plug, transmission drain plug, spark plugs, valve cover, or an intake manifold.

    Wheel Lug Torque Pattern

    When tightening the lug nuts on your Model Y, it is critical to use a star or cross pattern. This ensures the wheel is seated evenly against the hub, preventing warping of the brake rotors and ensuring a secure fit. Never tighten lug nuts in a circular sequence. Start with one lug nut, then tighten the one most directly across from it, continuing this pattern until all nuts are snug. Finally, perform a final pass in the same pattern to bring each lug nut to its final torque specification of 129 ft-lb (175 Nm).

    Brake Torque Notes

    Properly torquing brake components is a matter of safety. The brake caliper bracket bolts are a critical fastener. On the Model Y, Tesla specifies different torque values for the front and rear brackets. It is recommended to use new bolts for reassembly, but if reusing the original bolts, be sure to clean the threads thoroughly and apply a fresh coat of a medium-strength thread-locking compound.

    The caliper slide pins require a much lighter touch. Over-torquing these can damage the pins or caliper bracket, preventing the caliper from moving freely. This can lead to uneven pad wear and reduced braking performance. Ensure the pins are clean and lubricated with a high-temperature silicone brake lubricant before installation.

    Why Torque Matters

    Using a calibrated torque wrench to tighten fasteners to the manufacturer's specified value is one of the most important aspects of automotive repair. It ensures that a fastener is tight enough to prevent it from loosening under vibration and load, but not so tight that it stretches the bolt, damages threads, or warps components.

    For a high-performance vehicle like the Tesla Model Y, with its significant power and regenerative braking forces, these values are especially critical. Incorrectly torqued wheels can lead to vibration or, in a worst-case scenario, wheel separation. Improper brake component torque can compromise the braking system's effectiveness and safety.

    Disclaimer: This guide is for reference only. While the values provided are based on available data for the 2024 Model Y, you should always verify critical fastener torque specifications in the official OEM service manual before beginning any work.

    Find a trusted shop on Repairius.

    Need service on your Tesla Model Y?

    Request service from shops in your area.

    More specs for the 2024 Tesla Model Y

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email