2023 Toyota Camry Bulb Size Chart & Upgrade Guide
A complete bulb size reference guide and LED upgrade walk-through for the 2023 Toyota Camry.
Working on this 2023 Toyota Camry? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
The 2023 Toyota Camry continues the model's reputation for reliability, safety, and modern styling. As an ASE-certified master technician, one of the most common questions I get from 8th-generation Camry owners revolves around lighting upgrades. The 2023 Camry features highly integrated lighting systems, meaning many of the primary lights are full LED assemblies straight from the factory. However, depending on your trim level (LE, SE, XLE, XSE, or TRD), there are still several replaceable incandescent bulbs you might want to swap out or upgrade.
Here is the complete guide to the 2023 Toyota Camry bulb sizes.
Quick reference
Note: Headlights, DRLs, and brake/tail lights on the 2023 Toyota Camry are integrated LED assemblies across all trims and cannot be serviced by replacing a simple bulb. If they fail, the entire assembly must be replaced.
| Location | Bulb Size | Type |
|---|---|---|
| Low Beam Headlight | Integrated | LED Assembly |
| High Beam Headlight | Integrated | LED Assembly |
| Daytime Running Light (DRL) | Integrated | LED Assembly |
| Fog Light (if equipped) | Integrated | LED Assembly |
| Front Turn Signal | 7444NA / 7443 (LE/SE) or Integrated (XLE/XSE) | Halogen / LED Assembly |
| Rear Turn Signal | 7440A (LE/SE) or Integrated (XLE/XSE) | Halogen / LED Assembly |
| Brake Light | Integrated | LED Assembly |
| Tail Light | Integrated | LED Assembly |
| Reverse Light | 921 (W16W) | Halogen / LED (trim dependent) |
| License Plate Light | 168 / W5W | Halogen |
| Front Side Marker | Integrated | LED Assembly |
| Dome / Map Light | 168 (Map) / DE3175 (Dome) | Halogen |
LED vs halogen upgrade considerations
For owners of the LE, SE, or TRD trims, you still have halogen bulbs in your turn signals, reverse lights, and interior fixtures. Upgrading these to LEDs is incredibly popular, but there are a few things to keep in mind:
- CANBUS Errors & Hyperflashing: The most critical upgrade consideration for a 2023 Camry is hyperflashing. If you replace the halogen turn signal bulbs (7444NA front / 7440A rear) with LEDs, the vehicle's computer will think a bulb is burnt out due to the lower power draw of the LED. To fix this, you must buy LED bulbs with built-in CANBUS resistors, or wire in external load resistors to mimic the electrical draw of a standard halogen bulb.
- Color Temperature: For the reverse lights and interior map/dome lights, upgrading to a 6000K white LED will perfectly match the factory LED headlights and give your Camry a premium, modern look.
- Clearance: When buying aftermarket LEDs for the reverse lights (921), make sure the bulb isn't too long, or it may hit the lens housing.
How to replace each bulb
- Front Turn Signals (LE/SE): You can access these from under the hood or by turning the steering wheel and peeling back the front wheel well liner. Twist the socket counterclockwise to remove it, pull the old bulb out, and push the new one in.
- Rear Turn Signals & Reverse Lights: Open the trunk and pull back the felt trunk liner behind the tail lights. You will see the plastic sockets for the turn signal (usually the larger outer socket) and the reverse light (inner socket on the trunk lid). Twist counterclockwise to release.
- License Plate Lights: These are accessible from the outside. Using a plastic trim tool, gently pry the housing out of the trunk lid. Disconnect the connector, twist the socket, and replace the small 168 wedge bulb.
- Interior Map & Dome Lights: Use a plastic trim removal tool (do not use a flathead screwdriver as it will scratch the plastic) to gently pop off the clear plastic covers. Pull the wedge bulbs straight out. For the festoon (tube-style) dome bulb, carefully pry it out from the spring-loaded metal clips.
Common lighting issues for this generation
The 8th-generation Toyota Camry (2018–present) has exceptionally reliable lighting systems. However, there are a couple of things to watch out for:
- Moisture in Headlights/Tail Lights: Occasionally, the seal on the factory LED assemblies can degrade, causing condensation inside the lens. Because these are sealed units, they cannot be taken apart to replace just a bulb. If moisture builds up, the whole assembly usually requires replacement. Check if you are still covered under Toyota's 3-year/36,000-mile basic warranty.
- Flickering Aftermarket LEDs: If you install cheap interior or reverse LEDs, they may begin to flicker after a few months due to poor heat dissipation. Always invest in high-quality LED brands.
- Hyperflashing: As mentioned, this is standard when upgrading turn signals without proper resistors.
If you are dealing with a damaged factory LED assembly, complex electrical issues, or just need a hand properly installing load resistors for your turn signals, don't guess—get professional help. Find a trusted shop on Repairius.
More specs for the 2023 Toyota Camry
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2023 Toyota Camry Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.
Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-09-18.