2022 Toyota Tacoma Oil Capacity & Filter

The 2022 Toyota Tacoma with the 2.7L 2TR-FE engine takes 6.1 quarts (5.8 liters) of 0W-20 engine oil, while the 3.5L 2GR-FKS engine requires 4.8 quarts (4.5 liters) of 0W-20 engine oil.

Quick answer

2.7L 2TR-FE Engine:

• Oil Capacity: 6.1 quarts (5.8 liters)
• Recommended Oil Weight: 0W-20
• Oil Spec: API SN PLUS / Resource Conserving or ILSAC GF-6A
• Oil Filter (Cartridge Type):
  • OEM Part Number (Toyota): 04152-YZZA6
  • Fram Cross-Reference: CH11915
  • Wix Cross-Reference: 57064
  • Mobil 1 Cross-Reference: M1C-251A

3.5L 2GR-FKS Engine:

• Oil Capacity: 4.8 quarts (4.5 liters)
• Recommended Oil Weight: 0W-20
• Oil Spec: API SN PLUS / Resource Conserving or ILSAC GF-6A
• Oil Filter (Cartridge Type):
  • OEM Part Number (Toyota): 04152-YZZA6
  • Fram Cross-Reference: CH11915
  • Wix Cross-Reference: 57064
  • Mobil 1 Cross-Reference: M1C-251A

Capacity by engine option

Oil change interval

Toyota recommends the following oil change intervals for the 2022 Tacoma:

• Normal Duty: Every 10,000 miles or 12 months, whichever comes first.
• Severe Duty: Every 5,000 miles or 6 months, whichever comes first. This applies if you frequently tow, drive in extreme temperatures, dusty conditions, or engage in extensive idling or short-trip driving.

Failing to adhere to severe duty intervals when applicable can lead to premature engine wear and reduced engine life.

Drain plug torque

The drain plug torque for both the 2.7L and 3.5L engines in the 2022 Toyota Tacoma is 30 ft-lbs (41 Nm). Always replace the crush washer with a new one during every oil change to prevent leaks. The OEM crush washer part number is typically 90430-12031.

How to change the oil

1. Gather your supplies: correct oil, new oil filter, new crush washer, drain pan, wrench for drain plug, oil filter wrench, and safety glasses.
2. Warm up the engine slightly, then turn it off and let it cool for a few minutes. This helps the oil drain better.
3. Locate the drain plug on the oil pan underneath the vehicle. Place the drain pan directly below it.
4. Using the appropriate wrench, carefully loosen and remove the drain plug. Allow all the old oil to drain completely.
5. Once the oil has drained, replace the drain plug with a new crush washer and torque it to 30 ft-lbs.
6. Locate the cartridge-style oil filter housing. Use an oil filter wrench to remove the cap. Be prepared for a small amount of oil to drain.
7. Remove the old filter element and O-rings from the housing. Install the new filter element and replace the O-rings provided with the new filter. Lubricate the new O-rings with a dab of fresh oil.
8. Reinstall the oil filter housing cap and tighten it hand-tight, then a quarter turn more, or to the manufacturer's recommended torque if you have one. Do not overtighten.
9. Carefully pour the recommended amount of new oil into the engine's oil fill cap.
10. Replace the oil fill cap, start the engine, and let it run for a minute to circulate the new oil. Check for any leaks around the drain plug and oil filter.
11. Turn off the engine, wait a few minutes, and then check the oil level using the dipstick. Add more oil if necessary to reach the "full" mark.

Common issues / tips

• Cartridge Filter Design: The 2022 Tacoma uses a cartridge-style oil filter, which requires removal of the housing and replacement of the internal filter element. Ensure you replace all associated O-rings that come with the new filter to prevent leaks.
• Oil Filter Wrench: A specific oil filter wrench (often a 64mm, 14-flute cap wrench) is highly recommended for easy and damage-free removal of the oil filter housing.
• Frame Rust (older generations, but still good to inspect): While more prevalent in older generations, it's always a good idea to inspect the frame for any signs of rust during maintenance, especially if you live in an area with salted roads.
• Check Fluid Levels Regularly: Beyond oil, regularly check coolant, brake fluid, power steering fluid (if applicable), and washer fluid. These checks are crucial for the longevity and safe operation of your Tacoma.
• Synthetic Oil Recommended: While not strictly mandated, using full synthetic 0W-20 oil is highly recommended for optimal engine protection, especially given the extended oil change intervals.

Need an oil change? Find a trusted shop on Repairius.