2024 Volvo VNR Paint Color Codes & Touch-Up Guide

Whether you are maintaining a single 2024 Volvo VNR or managing a whole fleet, keeping your truck's exterior in top condition is essential for protecting your investment and projecting a professional image. Rock chips, dock scrapes, and road debris are unavoidable realities of commercial driving. Knowing your exact factory paint code is the first step in performing seamless touch-up repairs.

Below is your complete guide to finding and using the correct paint codes for the 2024 Volvo VNR.

Quick reference

Volvo offers highly customizable fleet colors for the VNR series, but many trucks roll off the line in Volvo's standard heavy-duty factory shades. Below is a list of the most common factory paint colors and codes for the 2024 Volvo VNR.

Note: Fleet buyers frequently order custom colors. Always verify your specific code using your VIN.

Where to find your paint code

Unlike passenger vehicles, commercial trucks like the Volvo VNR can sometimes have paint codes in varied locations depending on how they were upfitted. To find the exact paint code for your 2024 Volvo VNR, look in the following places:

1. The Driver's Side Door Jamb (B-Pillar): Open the driver’s side door and inspect the B-pillar and the edge of the door itself. You will typically find the manufacturer's Service Parts Identification (SPID) label or standard VIN sticker. Look for a code labeled "PNT," "Paint," or "Color."
2. Passenger Side Door Jamb: Volvo frequently places a secondary identification sticker on the passenger side door frame.
3. Firewall / Engine Bay: Lift the hood and check the firewall on the driver's side for a stamped metal plate.
4. VIN Verification: Because commercial trucks are often painted in custom fleet colors, the most foolproof method is to call a local Volvo Trucks dealership parts department. Give them the last 8 digits of your VIN, and they can pull the exact factory paint formulation.

Best touch-up paint sources

Getting an exact color match for commercial trucks can be slightly different from consumer cars, but excellent sources are available:

• AutomotiveTouchup: One of the most reliable sources for exact OEM matching. They custom-mix paint based on your Volvo factory code and offer it in pen, brush-in-bottle, and aerosol spray formats.
• Your Local Volvo Trucks Dealer: The dealer parts department is the best place to get OEM touch-up pens and small spray cans, especially for proprietary fleet colors.
• Tcoat Custom-Mix: Tcoat is a great option for professional-grade touch-up kits that include primer, base coat, and clear coat specifically mixed for heavy-duty applications.
• Dupli-Color: While Dupli-Color is widely available at local auto parts stores (like AutoZone or O'Reilly), they focus more on passenger cars. You may find "Universal Black" or "Universal Fleet White" that works well enough for chassis touch-ups, but OEM-specific VNR colors will likely require a custom mix.

How to use touch-up paint

For a repair that protects your cab from rust and blends in cleanly, follow these standard touch-up steps:

1. Clean and Prep: Wash the damaged area with soap and water, then wipe it down with a wax and grease remover (or rubbing alcohol). If there is surface rust, carefully remove it with a fiberglass prep pen or fine-grit sandpaper.
2. Apply Primer: If the scratch or chip goes down to bare metal or fiberglass, apply a light coat of automotive primer. Let it dry completely (usually 20-30 minutes).
3. Apply the Base Coat (Color): Shake your touch-up paint vigorously. Apply the paint in light, thin layers using a fine-tipped brush or toothpick for chips. Wait 15-20 minutes between coats. Build the color up until it is just below the level of the surrounding original paint.
4. Apply Clear Coat: Once the base coat is dry (wait at least an hour), apply the clear coat. The clear coat provides the UV protection and glossy finish that matches the factory paint. Allow it to cure for a few days before polishing or waxing the area.

Color matching tips for pearls and tri-coats

While most commercial Volvo VNR trucks are painted in durable solid colors like Glacier White or Viper Red, premium owner-operator specs might feature metallic or pearl finishes.

If your truck has a metallic or pearl tri-coat finish, keep in mind that these paints consist of a base color coat, a mid-coat containing pearl or metallic flakes, and a final clear coat. Achieving a perfect match with a brush can be difficult because the metallic flakes need to lay flat. When repairing metallic paints, use an aerosol spray if the chip is larger than a pencil eraser to ensure an even distribution of the metallic flake. Always practice on a piece of scrap metal or cardboard first to test your spraying distance and color match.

Find a trusted body shop on Repairius.