2016 Chevrolet Silverado 1500 Oil Capacity & Filter

The 2016 Chevrolet Silverado 1500 takes between 6.0 and 8.0 quarts (5.7 to 7.6 liters) of 0W-20, 5W-30, or 5W-40 engine oil, depending on the engine. Always consult your owner's manual for the most accurate information.

Quick answer

• Oil Capacity:
  • 4.3L V6 (LV3): 6.0 quarts (5.7 Liters)
  • 5.3L V8 (L83): 8.0 quarts (7.6 Liters)
  • 6.2L V8 (L86): 8.0 quarts (7.6 Liters)
• Recommended Oil Weight:
  • All Engines: SAE 0W-20 (Preferred) or SAE 5W-30. In extremely cold climates below -20°F (-29°C), 0W-20 is recommended. For sustained heavy towing or extreme hot climates, SAE 5W-40 synthetic oil meeting the appropriate Dexos specification may be used in the 5.3L and 6.2L engines. Always check your owner's manual.
• Oil Spec: Dexos1 Gen2 (or newer Dexos1 Gen3) synthetic blend or full synthetic. Look for the Dexos logo on the oil container.
• Oil Filter Part Number:
  • OEM AC Delco PF63E
  • Fram PH10575
  • Wix 57060
  • Mobil 1 M1-113A

Capacity by engine option

Note: For sustained heavy towing or extreme hot climates, SAE 5W-40 synthetic oil meeting Dexos standards may be used in the 5.3L and 6.2L engines. Always follow your owner's manual recommendations.

Oil change interval

The 2016 Chevrolet Silverado 1500 is equipped with a an Oil Life Monitoring (OLM) system. This system calculates when an oil change is due based on various factors like engine revolutions, operating temperature, and driving habits. It's generally recommended to change your oil when the OLM indicates remaining oil life is 10-20% or less.

• Normal Duty: Typically, the OLM will suggest an oil change somewhere between 7,500 and 10,000 miles (12,000 to 16,000 km) or annually, whichever comes first. This is for drivers who mostly operate their trucks in moderate conditions with regular highway driving.
• Severe Duty: If you frequently drive in demanding conditions, such as heavy towing, sustained high-speed driving in hot weather, extensive idling, or dusty environments, the OLM system will likely trigger an oil change sooner, potentially between 3,000 and 5,000 miles (4,800 to 8,000 km) or every 3-6 months. Always adhere to the OLM. If the OLM system is reset accidentally or malfunctions, a general guideline is to change the oil every 7,500 miles or annually.

Drain plug torque

The drain plug torque specification for the 2016 Chevrolet Silverado 1500 is 18 lb-ft (24 Nm) for the 4.3L V6 and 5.3L/6.2L V8 engines. It is highly recommended to replace the drain plug gasket or crush washer each time you perform an oil change to ensure a proper seal and prevent leaks.

How to change the oil

Changing the oil on your 2016 Silverado 1500 is a straightforward task:

1. Gather your tools: Oil drain pan, new oil filter, new oil, wrench for the drain plug (typically 15mm for GM trucks), oil filter wrench, and a new crush washer.
2. Warm up the engine: Drive the truck for a few minutes to get the oil to operating temperature, ensuring it drains more easily.
3. Lift and secure: Safely lift the front of the truck using a jack and secure it with jack stands. This provides easier access to the drain plug and oil filter.
4. Drain the oil: Place the drain pan under the oil pan, then carefully remove the drain plug. Allow all the old oil to drain completely.
5. Replace filter: Once the oil has drained, remove the old oil filter. Be prepared for a small amount of oil to spill. Apply a thin coat of new oil to the gasket of the new filter before screwing it on hand-tight, then an additional 3/4 to 1 turn.
6. Reinstall drain plug: Install the new crush washer on the drain plug and reinstall it into the oil pan. Torque to 18 lb-ft (24 Nm).
7. Add new oil: Lower the truck and fill the engine with the recommended amount and type of new oil through the oil filler cap. Start with a slightly lower amount and check the dipstick.
8. Check for leaks and level: Start the engine and let it run for a few minutes, then shut it off and let it sit for a few more. Check the oil level on the dipstick and top off if necessary. Inspect for any leaks around the drain plug and oil filter.

Common issues / tips

• Active Fuel Management (AFM) / Dynamic Fuel Management (DFM): The 5.3L and 6.2L V8 engines in the 2016 Silverado 1500 feature AFM, which can sometimes lead to increased oil consumption. Using high-quality Dexos-approved synthetic oil and adhering to oil change intervals is crucial. Some owners opt for aftermarket AFM disablers, though this can affect warranties. Regular oil level checks are highly recommended.
• Oil Pan Material: Many 2016 Silverado 1500 models feature a stamped steel oil pan. Be careful not to overtighten the drain plug, as this can strip the threads. Always use a torque wrench.
• Filter Location: The oil filter on these trucks is easily accessible from underneath the vehicle, making changes relatively simple.
• Check Oil Level Regularly: Due to potential AFM-related oil consumption, get into the habit of checking your oil level every few fuel fill-ups or once a month, adding oil as needed.

Need an oil change? Find a trusted shop on Repairius.