2025 Chevrolet Silverado 2500HD Key Fob Programming

Quick reference

Step-by-step on-board programming

Unfortunately, the 2025 Chevrolet Silverado 2500HD does not support on-board programming for new key fobs. This is because modern vehicles, especially those with push-to-start ignitions and advanced security features, require specialized diagnostic equipment to program new keys and remotes. This process involves accessing the vehicle's immobilizer system, which is a security measure to prevent unauthorized starting of the engine. Therefore, you will need to have a professional locksmith or an authorized Chevrolet dealership program any new key fobs for you.

Battery replacement

Replacing the battery in your 2025 Chevrolet Silverado 2500HD key fob is a simple process that you can do yourself.

1. Locate the small release button on the side of the key fob.
2. Press the button to release the emergency key from the fob.
3. Use the emergency key or a small flathead screwdriver to pry open the two halves of the key fob. There is a small indentation where the emergency key was located that you can use for leverage.
4. Carefully separate the two halves of the fob, being mindful of the internal components.
5. The CR2032 battery will be visible on one side of the fob. Note the orientation of the battery before removing it.
6. Gently pop out the old battery and replace it with a new CR2032 battery, ensuring the positive side is facing the correct direction.
7. Snap the two halves of the key fob back together until they are securely closed.
8. Reinsert the emergency key.

Where to buy a replacement fob

• Chevrolet Dealership: This is the most expensive option, but you are guaranteed to get a genuine OEM key fob that is compatible with your vehicle. The cost of a new fob and programming at a dealership can range from $200 to $400 or more.
• Locksmith: A professional automotive locksmith can often provide and program a new key fob for less than the dealership. They may offer both OEM and high-quality aftermarket fobs. Expect to pay between $150 and $300 for a new fob and programming from a locksmith.
• Amazon/Online Retailers: You can find a wide variety of aftermarket key fobs on Amazon and other online retailers for as little as $30 to $80. However, the quality can vary, and you will still need to have the fob programmed by a locksmith or dealership. Be aware that some professionals may be hesitant to program a fob that they did not supply, as they cannot guarantee its quality or compatibility.

If on-board programming isn't supported

As mentioned, the 2025 Chevrolet Silverado 2500HD requires a professional to program new key fobs. This is due to the vehicle's immobilizer system, which uses a transponder chip in the key fob to communicate with the vehicle's computer. Without the correct programming, the vehicle will not start, even if the key is cut to match the ignition. This is a crucial security feature that prevents car theft. When a locksmith or dealership programs a new key, they use a scan tool to register the new key's transponder with the vehicle's immobilizer system, which deactivates the security system and allows the engine to start.

Find a mobile locksmith or shop on Repairius.