Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Torque Specifications

    2017 Chevrolet Tahoe — Torque Specifications

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2017 Chevrolet Tahoe? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick Reference

    FastenerTorque (ft-lb / Nm)Notes
    Wheel Lug Nuts140 ft-lb (190 Nm)Star/Cross pattern
    Oil Drain Plug18 ft-lb (24 Nm)
    Transmission Drain Plug20-30 ft-lb (27-41 Nm)Check specific transmission model
    Front Brake Caliper Bracket Bolts130 ft-lb (175 Nm)
    Rear Brake Caliper Bracket Bolts130 ft-lb (175 Nm)
    Front Brake Caliper Slide Pins22 ft-lb (30 Nm)
    Rear Brake Caliper Slide Pins22 ft-lb (30 Nm)
    Front Axle Nut (2WD/4WD)155 ft-lb (210 Nm)Single-use nut, replace after removal
    Spark Plugs13-15 ft-lb (18-20 Nm)Avoid over-tightening
    Valve Cover Bolts89 in-lb (10 Nm)

    Wheel Lug Torque Pattern

    For your 2017 Chevrolet Tahoe, regardless of trim level or drivetrain, the wheel lug nuts should always be tightened in a star or cross pattern. This ensures even seating of the wheel against the hub, preventing warping of the rotor or uneven stress on the wheel studs. Always tighten the lug nuts in several steps, gradually increasing the torque to the final specification.

    Brake Torque Notes

    When working on the brakes of your 2017 Chevrolet Tahoe, proper torque is paramount for safety and performance. The brake caliper bracket bolts are critical safety components. Ensure these are torqued to the specified value to prevent loosening, which can lead to catastrophic brake failure. Brake caliper slide pins, while requiring significantly less torque, are also important. They allow the caliper to float freely, ensuring even brake pad wear and effective braking. Using thread locker (typically medium strength, like blue Loctite) is often recommended on caliper bracket bolts, but always refer to the OEM service manual for specific recommendations. Never reuse old hardware if the manufacturer specifies replacement, such as with axle nuts which are often designed for single-use due to their locking mechanism.

    Why Torque Matters

    Proper fastener torque is not just a suggestion; it's a critical engineering specification that impacts the safety, reliability, and longevity of your vehicle. Under-tightening a fastener can lead to it vibrating loose, potentially causing components to separate or function improperly, which can be extremely dangerous. Over-tightening, on the other hand, can strip threads, stretch bolts beyond their yield point (permanently weakening them), or crack components. This can lead to premature failure of parts and costly repairs. For critical components like wheel lug nuts, brake components, and engine fasteners, adhering to the manufacturer's torque specifications ensures that the parts are held together with the correct clamping force, distributing stress evenly and preventing failures. It also helps prevent leaks from components like oil pans and valve covers.

    Disclaimer: Always verify critical fastener torque specifications in the official OEM service manual for your specific 2017 Chevrolet Tahoe model. This information is intended as a general guide and should not replace professional guidance or OEM documentation.

    Find a trusted shop on Repairius.

    Need service on your Chevrolet Tahoe?

    Request service from shops in your area.

    More specs for the 2017 Chevrolet Tahoe

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email