2025 Ford Explorer Oil Capacity & Filter

The 2025 Ford Explorer takes 5.7 quarts (5.4 liters) of 5W-30 synthetic blend motor oil for the 2.3L EcoBoost engine and 6.0 quarts (5.7 liters) of 5W-30 synthetic blend motor oil for the 3.0L EcoBoost engine.

Quick answer

2.3L EcoBoost Engine

• Oil Capacity: 5.7 quarts (5.4 liters)
• Recommended Oil Weight: 5W-30
• Oil Type Spec: Ford WSS-M2C961-A1, API SN PLUS or higher RC (Resource Conserving)
• OEM Oil Filter Part Number: Consult dealer for latest part number
• Aftermarket Oil Filter Cross-References:
  • Fram: Consult aftermarket catalog
  • Wix: Consult aftermarket catalog
  • Mobil 1: Consult aftermarket catalog

3.0L EcoBoost Engine

• Oil Capacity: 6.0 quarts (5.7 liters)
• Recommended Oil Weight: 5W-30
• Oil Type Spec: Ford WSS-M2C961-A1, API SN PLUS or higher RC (Resource Conserving)
• OEM Oil Filter Part Number: Consult dealer for latest part number
• Aftermarket Oil Filter Cross-References:
  • Fram: Consult aftermarket catalog
  • Wix: Consult aftermarket catalog
  • Mobil 1: Consult aftermarket catalog

Capacity by engine option

Oil change interval

Ford recommends the following oil change intervals for the 2025 Explorer:

• Normal Duty: Every 7,500 – 10,000 miles or 12 months, whichever comes first.
• Severe Duty: Every 3,000 – 5,000 miles or 6 months, whichever comes first. This applies if you frequently drive in conditions such as heavy city traffic, dusty environments, extreme temperatures, or tow a trailer.

Always refer to your owner's manual and the intelligent oil-life monitor system for the most accurate oil change guidance.

Drain plug torque

The oil drain plug torque for the 2025 Ford Explorer is typically 19 lb-ft (25 Nm). It is highly recommended to use a new crush washer with every oil change to ensure a proper seal and prevent leaks. Consult your owner's manual or a Ford service manual for the exact specification.

How to change the oil

1. Warm up the engine: Drive the vehicle for a few minutes to bring the oil to operating temperature, making it flow more easily.
2. Lift and secure: Safely lift the front of the vehicle using a jack and secure it with jack stands.
3. Locate drain plug: Place an oil drain pan beneath the oil pan and locate the drain plug.
4. Drain oil: Carefully remove the drain plug (with a new crush washer ready for installation) and allow all the old oil to drain completely.
5. Replace drain plug: Once drained, reinstall the drain plug with a new crush washer and tighten to the specified torque.
6. Replace oil filter: Locate the oil filter. Place the oil drain pan under it, unscrew the old filter, and allow any residual oil to drain. Apply a thin layer of new oil to the gasket of the new filter before screwing it on hand-tight, then an additional quarter to half turn.
7. Refill with new oil: Lower the vehicle and add the recommended amount and type of fresh oil through the oil filler cap.
8. Check oil level: Start the engine and let it run for a few minutes. Turn off the engine, wait a few minutes, then check the oil level with the dipstick and top off if necessary.
9. Reset oil life monitor: Follow the procedure in your owner's manual to reset the oil life monitoring system.

Common issues / tips

• Turbocharged Engines: With both engine options being turbocharged, using the correct synthetic blend oil meeting Ford's specifications is crucial for turbocharger longevity and performance.
• Oil-Life Monitor: Pay close attention to the intelligent oil-life monitor in your vehicle. It adjusts intervals based on driving conditions.
• Plastic Drain Plugs: Some modern Ford vehicles utilize plastic drain plugs. These often require a specific tool for removal and should be replaced with each oil change. Confirm the type of drain plug on your 2025 Explorer.
• Regular Checks: Periodically check your oil level between changes, especially with turbocharged engines, as they can sometimes consume a small amount of oil.

Need an oil change? Find a trusted shop on Repairius.