2024 Ford F-150 Oil Capacity & Filter Guide

Quick Answer

The 2024 Ford F-150 takes between 6.0 to 8.5 quarts of oil, depending on the engine. Always verify the exact capacity for your specific engine and trim level.

• 2.7L EcoBoost V6: 6.0 quarts (5.7 Liters) of 5W-30 synthetic blend or full synthetic oil, meeting Ford WSS-M2C961-A1 and API SP specifications.
  • Oil Filter: FL-2124 (Motorcraft OEM)
  • Aftermarket Cross-Reference: Fram PH12579, Wix 57502, Mobil 1 M1-212
• 3.5L EcoBoost V6: 6.0 quarts (5.7 Liters) of 5W-30 synthetic blend or full synthetic oil, meeting Ford WSS-M2C961-A1 and API SP specifications.
  • Oil Filter: FL-2069 (Motorcraft OEM)
  • Aftermarket Cross-Reference: Fram PH11665, Wix 57597, Mobil 1 M1-210
• 3.5L PowerBoost Hybrid V6: 6.0 quarts (5.7 Liters) of 5W-30 synthetic blend or full synthetic oil, meeting Ford WSS-M2C961-A1 and API SP specifications.
  • Oil Filter: FL-2069 (Motorcraft OEM)
  • Aftermarket Cross-Reference: Fram PH11665, Wix 57597, Mobil 1 M1-210
• 5.0L Ti-VCT V8: 7.7 quarts (7.3 Liters) of 5W-30 synthetic blend or full synthetic oil, meeting Ford WSS-M2C961-A1 and API SP specifications.
  • Oil Filter: FL-500S (Motorcraft OEM)
  • Aftermarket Cross-Reference: Fram PH2, Wix 51372, Mobil 1 M1-210
• 3.3L Ti-VCT V6: 6.0 quarts (5.7 Liters) of 5W-20 synthetic blend or full synthetic oil, meeting Ford WSS-M2C960-A1 and API SP specifications.
  • Oil Filter: FL-910S (Motorcraft OEM)
  • Aftermarket Cross-Reference: Fram PH3614, Wix 51372, Mobil 1 M1-102
• 5.2L Supercharged V8 (Raptor R): 8.5 quarts (8.0 Liters) of 5W-30 full synthetic oil, meeting Ford WSS-M2C961-A1 and API SP specifications.
  • Oil Filter: FL-500S (Motorcraft OEM)
  • Aftermarket Cross-Reference: Fram PH2, Wix 51372, Mobil 1 M1-210

Capacity by Engine Option

Oil Change Interval

Ford recommends an oil change interval for the 2024 F-150 based on your vehicle's Intelligent Oil-Life Monitor (IOLM) system. This system takes into account various factors such as driving conditions, engine temperature, and operating hours to determine the optimal oil change schedule.

• Normal Duty: Typically, the IOLM will recommend an oil change every 7,500-10,000 miles or 6-12 months, whichever comes first. For most drivers, this will be the applicable interval.
• Severe Duty: If you frequently operate your F-150 under severe conditions, such as short trips (less than 10 miles), heavy towing/hauling, extensive idling, or dusty environments, the IOLM will likely recommend more frequent oil changes, possibly as often as every 3,000-5,000 miles or 3-6 months. It's crucial to follow the IOLM's warnings for severe duty to ensure engine longevity.

Always consult your owner's manual for the most accurate and up-to-date information regarding oil change intervals for your specific truck.

Drain Plug Torque

The oil drain plug torque specification for most 2024 Ford F-150 engines is 19 lb-ft (25 Nm). It is highly recommended to use a new crush washer with each oil change to ensure a proper seal and prevent leaks. Some F-150 models, particularly those with the 2.7L EcoBoost engine, may feature a plastic drain plug that is designed to be replaced, not reused. Consult your owner's manual or local Ford dealer for the precise part number and torque specification if your F-150 is equipped with the plastic drain plug.

How to Change the Oil

Changing the oil on your 2024 Ford F-150 is a straightforward process for the DIY mechanic. Always refer to your owner's manual for specific instructions and safety precautions.

1. Gather Supplies: New oil (correct type and capacity), oil filter, oil filter wrench, drain pan, latex gloves, jack and jack stands, torque wrench, and a new crush washer (or plastic drain plug if applicable).
2. Warm Up Engine (Optional): Drive the truck for a few minutes to warm the oil slightly. This helps it drain more thoroughly. Be careful, as the engine components will be hot.
3. Lift and Secure: Safely lift the front of the truck using a jack and support it securely with jack stands.
4. Locate Drain Plug: Place the drain pan underneath the oil pan. Locate the drain plug on the bottom of the oil pan.
5. Drain Oil: Carefully remove the drain plug (using a wrench if equipped with a metal plug, or by hand for plastic plugs in some models). Allow all the old oil to drain completely.
6. Replace Drain Plug: Once drained, clean the drain plug and the mating surface. Install a new crush washer (if applicable) and re-install the drain plug. Torque to 19 lb-ft (25 Nm). If you have a plastic drain plug, replace it with a new one according to manufacturer instructions.
7. Remove Old Filter: Place the drain pan under the oil filter location. Use an oil filter wrench to loosen and remove the old oil filter. Be aware that some oil will spill.
8. Prepare New Filter: Apply a thin film of new oil to the rubber gasket of the new oil filter.
9. Install New Filter: Hand-tighten the new oil filter until the gasket makes contact, then tighten an additional 3/4 to 1 full turn. Do not overtighten.
10. Refill Oil: Lower the truck. Remove the oil fill cap and carefully pour in the recommended amount and type of new oil using a funnel.
11. Check Level: Start the engine and let it run for a minute to circulate the new oil. Shut off the engine, wait a few minutes for the oil to settle, and then check the oil level with the dipstick. Add more oil if necessary, but do not overfill.
12. Inspect for Leaks: Check around the drain plug and oil filter for any leaks. Dispose of the old oil and filter responsibly.

Common Issues / Tips

• 2.7L EcoBoost Plastic Drain Plug: Be aware that many 2.7L EcoBoost engines from 2021 onwards use a plastic drain plug that is designed to be replaced with each oil change. These can be fragile, so handle with care. Ensure you have the correct replacement part before starting your oil change.
• 5.0L Oil Consumption: While often improved in newer generations, some 5.0L V8 owners have reported higher-than-average oil consumption. It's always a good practice to regularly check your oil level between changes, especially if you drive a 5.0L, to avoid potential issues.
• Intelligent Oil-Life Monitor (IOLM): Trust the IOLM system in your F-150. It's designed to optimize oil change intervals based on your actual driving conditions, potentially saving you money and reducing waste while still protecting your engine. Don't simply rely on old-fashioned mileage-based intervals.
• Use Quality Oil: Given the advanced engineering of the F-150's engines, especially the EcoBoost and PowerBoost variants, using high-quality synthetic blend or full synthetic oil that meets the specified Ford WSS-M2C96X-A1 and API SP standards is crucial for performance and longevity. Cheapest oil is false economy here.
• Cross-Referencing Filters: While aftermarket filters are generally fine, ensure you use reputable brands like Fram, Wix, or Mobil 1 that precisely cross-reference to the Motorcraft OEM part number.

Need an oil change? Find a trusted shop on Repairius.