Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Factory Maintenance Schedule

    2023 Freightliner M2 106 - Factory Maintenance Schedule

    Everything on this vehicle

    Working on this 2023 Freightliner M2 106? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick reference

    MileageServiceNotes
    10,000 miles (or 6 months)Engine Oil & Filter ChangeCrucial for engine longevity. Use manufacturer-recommended conventional or blended oil. Severe duty: 5,000-7,500 miles.
    Fuel Filter ReplacementCritical for fuel system health, especially with modern diesel engines.
    Chassis LubricationGrease all fittings; essential for suspension and steering components.
    Tire Rotation/InspectionEven wear, check pressure, inspect for damage.
    Fluid Level CheckAll fluids (coolant, power steering, etc.)
    Brake System InspectionPads, rotors, lines, drums.
    Lights & Electrical CheckAll exterior and interior lights, horn, wipers.
    Air Filter InspectionInspect, replace if dirty.
    20,000 miles (or 12 months)All 10,000-mile services, plus:
    Cabin Air Filter ReplacementEnsures clean air for occupants.
    Engine Air Filter ReplacementDepending on operating conditions, replace if dirty. Severe duty: more frequently.
    Battery CheckClean terminals, test charge.
    30,000 miles (or 18 months)All 10,000-mile services, plus:
    Check Transmission FluidInspect level and condition.
    Replace Differential FluidFront and rear (if applicable) for optimal gear protection.
    60,000 miles (or 36 months)All 10,000 and 20,000-mile services, plus:
    Transmission Fluid and Filter ServiceEssential for automatic transmissions. Consult owner's manual for specific fluid type. Manual transmissions: inspect and top off as needed, replace fluid based on condition and use.
    Coolant Flush and ReplacementDepending on coolant type (e.g., Extended Life Coolant), this interval can vary. Always use manufacturer-recommended coolant.
    Accessory Drive Belt Inspection/ReplacementInspect for cracks, wear, or fraying. Replace if necessary.
    Brake Fluid FlushEnsures optimal braking performance and prevents moisture contamination.
    PCV Valve Inspection/ReplacementInspect and replace if needed. Often overlooked, but important for engine breathing.
    100,000 miles (or 60 months)All 10,000, 20,000, and 60,000-mile services, plus:
    Fuel Filter ReplacementMore frequent replacement under severe duty conditions.
    Inspect/Adjust Valve Lash(If applicable to engine type - consult owner's manual)
    Timing Belt/Chain InspectionMost modern diesel engines use timing chains designed to last the life of the engine. However, inspection for wear or tensioner issues is always recommended. Consult your owner's manual for specific recommendations.
    150,000 miles (or 90 months)All previous services, plus typically repeat major services as needed.At this mileage, many components are reaching their designed lifespan. Focus on thorough inspections.
    Consider Injector Inspection/ServiceDepending on fuel quality and operational history.

    Maintaining your 2023 Freightliner M2 106 according to the factory-recommended schedule is paramount for its long-term reliability, efficiency, and safety. This medium-duty truck is a workhorse, and consistent maintenance will help it perform optimally for years to come.

    Severe-duty schedule

    Commercial trucks often operate under conditions that fall under the

    Need service on your Freightliner M2 106?

    Request service from shops in your area.

    More specs for the 2023 Freightliner M2 106

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-24.

    Driving or Managing a Fleet?

    Use Dispatchtool for truck navigation, driver communication, dispatching, and fleet management.

    Visit Dispatchtool
    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email