2023 Freightliner M2 106 Paint Codes

Quick reference

Where to find your paint code

For the 2023 Freightliner M2 106, your paint code is typically located on the driver's side door jamb. Look for a sticker or plate that contains vehicle information. The paint code will usually be listed under " exterior paint code" or similar designation. It will be a string of characters, often beginning with a "G" followed by four digits.

Best touch-up paint sources

When it comes to maintaining the finish of your Freightliner M2 106, having the right touch-up paint is essential. Here are some of the most reliable sources:

• Dupli-Color: A widely available brand, Dupli-Color offers a range of touch-up paints in various forms, including paint pens, brush bottles, and spray cans. They might have a good selection for common Freightliner colors.
• AutomotiveTouchup: This company specializes in custom-mixed automotive paints, ensuring a precise match to your vehicle's factory finish. They can typically match any Freightliner color code.
• Tcoat Custom-Mix: Similar to AutomotiveTouchup, Tcoat provides custom-mixed paint solutions that are exceptionally accurate, especially for complex colors.
• Freightliner Dealership: For direct-from-the-manufacturer accuracy, your local Freightliner dealership parts department can supply OEM touch-up paint. This is often the best option for exact color matching.

How to use touch-up paint

Applying touch-up paint correctly can make a big difference in the appearance and protection of your truck. Follow these steps for the best results:

1. Clean the Area: Thoroughly clean the damaged area with soap and water, then use a degreaser or wax remover to ensure no contaminants are present.
2. Sand (if necessary): For deeper scratches or chips, gently sand the area with fine-grit sandpaper (e.g., 2000-grit) to smooth out the edges.
3. Apply Primer: If the bare metal is exposed, apply a thin layer of automotive primer and let it dry completely according to the product instructions.
4. Apply Base Coat: Shake your touch-up paint thoroughly. Apply thin, even coats of the base color, allowing each coat to dry before applying the next. Build up the paint until it's level with the surrounding area.
5. Apply Clear Coat: Once the base coat is dry, apply several thin layers of clear coat to protect the paint and provide a glossy finish. Allow ample drying time between coats.
6. Wet Sand and Polish (optional): For a truly seamless repair, you can gently wet sand with very fine grit sandpaper (3000-grit or higher) after the clear coat has fully cured, then polish the area to blend with the original paint.

Color matching tips for pearls and tri-coats

Pearl and tri-coat paints, which often contain metallic flakes or multiple layers of translucent paint, can be challenging to match perfectly. Here are some tips:

• Layering is Key: Tri-coat paints involve a base color, a mid-coat (often a pearl or translucent layer), and a clear coat. Each layer contributes to the final color and effect. Ensure you apply all intended layers from your touch-up paint kit.
• Practice: Before applying to your truck, practice on a test surface to get a feel for how the paint layers build up and how the color develops.
• Lighting: Always check your work in natural daylight. Different lighting conditions can dramatically alter the appearance of metallic and pearl finishes.
• Professional Help: For significant damage or if you're unsure about matching a complex color, consider consulting a professional body shop. They have specialized equipment and expertise in blending these challenging finishes.

Find a trusted body shop on Repairius.