2025 Freightliner M2 106 Paint Color Codes & Touch-Up Guide

Keeping your 2025 Freightliner M2 106 looking professional is essential for your business's image. Whether your M2 106 operates as a box truck, flatbed, or heavy-duty towing rig, rock chips, scratches, and everyday wear and tear are unavoidable. Finding the exact factory paint code is the first step to executing a seamless repair and preventing rust on your commercial investment.

Below is a comprehensive guide to the standard factory colors offered for the 2025 Freightliner M2 106, along with tips on locating your specific code and applying touch-up paint correctly.

Quick reference

Freightliner commercial trucks are highly customizable, meaning fleet buyers can order almost any color imaginable. However, the vast majority of M2 106 trucks roll off the line in Freightliner's standard commercial fleet colors. Here are the most common standard factory paint codes for the 2025 Freightliner M2 106:

Note: Because Freightliner allows for virtually infinite custom fleet colors, always confirm your specific paint code via your VIN before ordering paint.

Where to find your paint code

Unlike standard passenger vehicles, commercial truck labels can sometimes be located in a few different areas depending on the upfitter. To find the exact paint code for your 2025 Freightliner M2 106, check the following locations:

1. Driver's Side Door Jamb: Open the driver's side door and look at the B-pillar or the door edge itself. You are looking for the Vehicle Certification Label or the Service Parts Identification sticker. The paint code is usually listed near the bottom of this label, often labeled as "Paint" or "PNT" followed by the alphanumeric code.
2. Passenger Side Door Frame: On some Freightliner models, secondary identification tags are placed on the passenger side.
3. Under the Hood / Firewall: Check for a stamped metal plate or heavy-duty sticker on the firewall.
4. Dealership VIN Check: If your sticker is faded, damaged, or missing due to upfitting, simply call your local Freightliner commercial dealership's parts department. Give them your 17-digit Vehicle Identification Number (VIN), and they can instantly pull up your factory paint code.

Best touch-up paint sources

Once you have your code, you need high-quality paint to make the repair. Here are the best sources for Freightliner M2 106 touch-up paint:

• AutomotiveTouchup: Excellent for commercial vehicles. They offer exact-match custom mixing based on your specific Freightliner "N" code, available in paint pens, brush-in-cap bottles, aerosols, and even ready-to-spray pints and gallons for larger panel repairs.
• Tcoat Custom-Mix: A great option for fleet managers needing bulk touch-up solutions or highly specific custom fleet matches.
• Dupli-Color: While they specialize in consumer vehicles, Dupli-Color offers "Universal" colors (like Universal Flat Black or Universal Gloss White) that can work in a pinch for minor chassis or generic white box touch-ups, though an exact N0006 match isn't guaranteed.
• Freightliner Dealer: Your local dealership's parts counter will sell OEM touch-up pens and small spray cans perfectly matched to your truck's specific build sheet.

How to use touch-up paint

Commercial trucks take a beating, so applying touch-up paint correctly is crucial to prevent future corrosion.

1. Clean: Thoroughly wash the chipped or scratched area with dish soap and water to remove road grime and diesel exhaust residue. Use a wax and grease remover or rubbing alcohol to prep the surface.
2. Primer: If the scratch goes down to the bare metal or fiberglass hood material, apply a light coat of automotive primer. Let it dry completely (usually 30 minutes).
3. Base Coat: Shake your base color vigorously. Apply the color in multiple thin layers rather than one thick puddle. Wait 10 to 15 minutes between each coat until the primer is fully covered.
4. Clear Coat: Once the base coat is completely dry to the touch (wait at least 30-60 minutes), apply 2 to 3 thin layers of clear coat. The clear coat protects the repair from UV rays and harsh weather and matches the factory gloss.

Color matching tips for pearls and tri-coats

While most Freightliner M2 106 trucks utilize single-stage or standard two-stage solid colors for easy fleet maintenance, some owner-operators and specialized fleets opt for custom metallic or pearl finishes.

If your truck has a metallic or tri-coat pearl finish, achieving a perfect match requires a bit more finesse. Tri-coats require a specific ground coat (base), a mid-coat (the pearl effect), and a final clear coat. When applying metallics, be sure to shake the bottle or can frequently to keep the metal flakes evenly suspended. Spray or brush the paint on in very light, even strokes to prevent the flakes from pooling and creating dark spots. Always test your custom pearl or metallic mix on a piece of scrap cardboard before applying it to the truck to ensure the flake density and color tint align with your factory finish.

Find a trusted body shop on Repairius.