2016 GMC Acadia Paint Color Codes

Quick Reference

Where to find your paint code

For your 2016 GMC Acadia, the paint code is typically located on a sticker in the glove compartment or on the service parts identification (SPID) label, which is often found on the underside of the trunk lid or in the spare tire well. It may also be on the regular certification sticker on the driver's side door jamb (B-pillar). The code will be a two-part code, starting with a "BC/CC" designation followed by numbers and letters, or just the WA code. For example, "Summit White" might appear as "GAZ" or "WA8624". Look for a label that explicitly mentions "Paint" or "Color" with a corresponding code.

Best touch-up paint sources

When it comes to touching up minor scratches or chips on your 2016 GMC Acadia, several reliable sources offer high-quality paint matching:

• Dupli-Color: A widely available brand that offers touch-up pens, paint bottles, and spray cans. They are a good option for small repairs and can be found at most automotive parts stores.
• AutomotiveTouchup: This online retailer specializes in custom-mixed touch-up paint specifically matched to your vehicle's factory color. They offer a wide range of products, including pens, bottles, spray cans, and larger quantities for more extensive repairs. Their custom-matched paints often provide excellent results.
• Tcoat Custom-Mix: (If available in your region) Tcoat offers custom-mixed automotive paints for precise color matching, often utilizing advanced spectrophotometer technology to ensure accuracy, especially for complex colors.
• Dealership: Your local GMC dealership can provide factory-matched touch-up paint directly from the manufacturer. This is often the most accurate option, though it might be slightly more expensive.

How to use touch-up paint

Applying touch-up paint effectively requires a few careful steps to achieve the best possible result:

1. Clean: Thoroughly clean the area to be touched up with soap and water, then an automotive degreaser or rubbing alcohol to remove any wax, grease, or dirt. Allow it to dry completely.
2. Primer (if necessary): If the scratch has gone down to the bare metal or plastic, apply a thin coat of automotive primer. Allow it to dry according to the product instructions.
3. Base Coat: Apply the color (base) coat in thin layers. For pens or small bottles, dab the paint onto the chip, building up the layers until it's flush with the surrounding paint. For spray cans, use light, even passes, holding the can about 6-10 inches away. Allow each coat to dry before applying the next.
4. Clear Coat: Once the base coat is dry, apply a clear coat. This protects the color and provides a glossy finish. Again, apply in thin, even layers. Allow it to cure fully.
5. Compounding/Polishing (optional): After the clear coat has fully cured (this can take several days), you can gently wet-sand with very fine-grit sandpaper (2000-3000 grit) and then polish and compound the area to blend it perfectly with the surrounding paint. Be extremely careful not to sand through the clear coat.

Color matching tips for pearls and tri-coats

For pearl and tri-coat paints, like Crimson Red Tintcoat or White Frost Tricoat for your 2016 Acadia, color matching can be more challenging due to their multi-layered nature. These paints achieve their depth and unique shimmer through multiple layers of paint, including a colored base coat, a mid-coat with pearl or metallic flakes, and a clear coat.

• Take your time: When applying touch-up paint to pearl or tri-coat finishes, be extra patient and apply very thin, even layers. Build up the color gradually to avoid an uneven appearance.
• Test first: If you have an inconspicuous area or a scrap piece of metal, test the touch-up paint there first to see how the layers build up and how the color appears.
• Consider professional help: For larger repairs or if you're uncomfortable tackling a pearl or tri-coat finish, it's often best to consult a professional body shop. They have the expertise and equipment to perfectly replicate these complex finishes.

Never invent codes. If you are uncertain about a specific color, list only the well-known popular colors and instruct the reader to confirm via VIN at a dealership or paint supplier. Always verify your specific paint code using your VIN to ensure an exact match.

Find a trusted body shop on Repairius.