2022 GMC Sierra 1500 Battery Replacement and Specs

Quick Answer

• BCI Group Size: H7/94R
• CCA Rating: 800 CCA (minimum)
• Reserve Capacity: 140-160 minutes (minimum)
• AGM vs. Flooded: AGM (recommended, often standard)
• Terminal Layout: Top Post
• Physical Dimensions: (Approximate) 12.4 inches (L) x 6.9 inches (W) x 7.5 inches (H)
• Dual-Battery Setup: Not applicable for gasoline 1500 models

Replacement Battery Options

• Interstate: MTZ-94R (AGM), MTP-94R (Flooded)
• Optima: DH7 (YellowTop AGM)
• DieHard: Platinum AGM H7
• Odyssey: ODP-AGM94R (Performance Series AGM)
• ACDelco: 94RAGM

AGM vs. Flooded — Which Does This Vehicle Need?

The 2022 GMC Sierra 1500, especially with features like Stop/Start technology, is designed to operate optimally with an Absorbent Glass Mat (AGM) battery. While a flooded lead-acid battery might fit physically and provide starting power, it will not offer the same level of performance, longevity, or handle the electrical demands of modern trucks as effectively as an AGM battery.

AGM batteries are superior for vehicles with advanced electrical systems due to their ability to:

• Handle deeper discharge cycles without damage.
• Provide more stable voltage output.
• Recharge faster.
• Resist vibration better.
• Prevent acid leakage.

Using a traditional flooded battery in a vehicle designed for AGM can lead to premature battery failure and potential issues with the vehicle's electrical system over time. For the best performance and to ensure all electrical components function as intended, an AGM battery is strongly recommended for your 2022 GMC Sierra 1500.

Post-Installation Relearn / Reset Procedure

After replacing the battery in your 2022 GMC Sierra 1500, it's crucial to perform a battery relearn procedure. This process allows the vehicle's Battery Energy Control Module (BECM) to re-learn the new battery's state of charge and optimize charging cycles. Failing to do so can lead to overcharging or undercharging, which shortens the life of the new battery and can cause sporadic electrical issues.

The general procedure involves:

1. Install the new battery: Ensure all connections are clean and secure.
2. Close all doors and turn off all accessories.
3. Start the engine and let it idle for at least 5-10 minutes without touching the accelerator. This allows the BECM to recognize the new battery.
4. Drive the vehicle: A short drive cycle (10-15 minutes) with varying speeds and stops can help further acclimate the system.

Some vehicles may require a more specific reset using a diagnostic scan tool to clear codes or reset parameters. If you experience persistent issues or warning lights after a battery replacement, consult your owner's manual or a qualified technician.

Signs of a Failing Battery

Recognizing the signs of a failing battery can save you from being stranded. Keep an eye out for these common indicators:

• Slow Engine Crank: The most common sign. The engine turns over sluggishly when you try to start it.
• Dashboard Warning Lights: A battery warning light on your dashboard is a clear indicator.
• Dim Headlights or Interior Lights: Especially noticeable when the engine is off or at idle.
• Electronic Issues: Malfunctioning power windows, radio, or other electrical accessories.
• Corrosion on Battery Terminals: White or bluish powdery substance around the terminals can indicate a poor connection or acid leakage.
• Swelling Battery Case: A swollen or bulging battery case indicates internal damage, often due to heat or overcharging.
• Frequent Jumps: If your truck needs frequent jump-starts, the battery is likely on its way out.
• Old Age: Most automotive batteries last 3-5 years. If yours is older, it's wise to have it tested.

Common Battery Issues for This Generation (2019-2022 GMC Sierra 1500)

Owners of the 2019-2022 GMC Sierra 1500 occasionally report battery-related issues, often tied to the vehicle's advanced electrical system and features like Auto Stop/Start.

• Early Battery Failure: Some owners have experienced batteries failing sooner than expected, sometimes due to the constant demands of the Stop/Start system. Using a high-quality AGM battery designed for these demands is crucial.
• Parasitic Draws: While not specific to the battery itself, various modules and accessories can draw power even when the vehicle is off, leading to a drained battery over time. Common culprits include infotainment systems, aftermarket accessories, or even faulty door switches that keep modules awake.
• Stop/Start System Malfunctions: Battery health directly impacts the Stop/Start system. A weak or failing battery can cause the system to function erratically or disable itself entirely.
• Issues After Disconnect: As mentioned, an improper relearn procedure after a battery disconnect can lead to various electrical gremlins, highlighting the importance of the correct post-installation steps.

Regular battery testing, especially as your battery ages, can help identify and address these issues before they become major problems.

Find a trusted shop on Repairius.