Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Factory Maintenance Schedule

    2019 GMC Sierra 2500HD: Factory Maintenance Schedule

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2019 GMC Sierra 2500HD? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick Reference: 2019 GMC Sierra 2500HD Maintenance

    MileageServiceNotes
    5,000Oil & Filter Change, Tire RotationGM's Oil Life Monitoring system may indicate an earlier change. Rotate tires every 5,000-7,500 miles.
    10,000Oil & Filter Change, Tire Rotation
    15,000Oil & Filter Change, Tire Rotation
    22,500Cabin Air Filter ReplacementRecommended interval, or annually.
    30,000Oil & Filter Change, Tire Rotation, Engine Air Filter Replacement
    45,000Transmission Fluid Service (Severe Duty), Transfer Case Service (4WD)Severe duty includes frequent towing, hauling, or off-road use.
    60,000Oil & Filter Change, Tire Rotation, Engine Air Filter Replacement
    90,000Transmission Fluid Service (Normal Duty), Transfer Case Service (4WD)
    97,500Spark Plug Replacement (Gas Engines)
    100,000Oil & Filter Change, Tire Rotation
    150,000Accessory Drive Belts Inspection/Replacement, Coolant FlushInspect belts for wear and tear. Flush and replace coolant.

    Severe-Duty Schedule

    The 2019 GMC Sierra 2500HD is built for tough conditions, but frequent towing, hauling, short trips, or driving in dusty or cold climates requires more frequent maintenance. Under a severe-duty schedule, expect to perform the following services more often:

    • Oil & Filter Change: Every 3,000-5,000 miles, or as indicated by the Oil Life Monitoring system.
    • Tire Rotation: Every 3,000-5,000 miles to ensure even wear.
    • Transmission Fluid Service: Every 45,000 miles.
    • Differential & Transfer Case Service: Every 45,000 miles.

    Known Issues by Mileage

    While the 2019 Sierra 2500HD is a reliable truck, some common issues may arise at certain mileage points:

    • DEF System Faults (Diesel): Diesel models may experience issues with the Diesel Exhaust Fluid (DEF) system, often due to sensor or injector problems. This can occur at any mileage but is more common after 30,000 miles.
    • Transmission Shudder: Some owners have reported a slight shudder or vibration from the transmission, particularly at low speeds. A transmission fluid flush with an updated fluid can often resolve this.
    • Infotainment System Glitches: The infotainment system may experience occasional freezing or connectivity issues. Software updates from a GM dealer can often fix these problems.

    Estimated Cost Per Service

    Service costs can vary by location and service center, but here are some estimated ranges:

    • Oil & Filter Change: $75-$150 (Diesel engines may be higher)
    • Tire Rotation: $20-$40
    • Cabin Air Filter Replacement: $40-$80
    • Engine Air Filter Replacement: $50-$100
    • Transmission Fluid Service: $250-$500
    • Coolant Flush: $150-$250
    • Spark Plug Replacement: $200-$400

    What You Can DIY vs. Shop

    Many maintenance tasks for the 2019 Sierra 2500HD can be performed at home with basic tools, while others are best left to a professional technician.

    DIY

    • Oil & Filter Change: A straightforward task for those with the right tools and knowledge.
    • Tire Rotation: Can be done with a jack and lug wrench, but a torque wrench is recommended.
    • Cabin & Engine Air Filter Replacement: Both are easily accessible and simple to replace.

    Shop

    • Transmission Fluid Service: Requires special equipment to ensure a complete fluid exchange.
    • Coolant Flush: A complete flush is best performed by a shop to ensure all old fluid is removed.
    • Spark Plug Replacement: While possible to do at home, improper installation can cause engine damage.
    • Timing Belt/Chain Inspection: The 2019 Sierra 2500HD uses a timing chain, which is designed to last the life of the engine and does not require regular replacement.

    Book service on Repairius.

    Need service on your GMC Sierra 2500HD?

    Request service from shops in your area.

    More specs for the 2019 GMC Sierra 2500HD

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Driving or Managing a Fleet?

    Use Dispatchtool for truck navigation, driver communication, dispatching, and fleet management.

    Visit Dispatchtool
    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email