2017 Honda Civic Oil Capacity & Filter

The 2017 Honda Civic takes between 3.7 and 4.2 quarts of 0W-20 engine oil, depending on the engine. This article details oil capacities, recommended oil types, filter part numbers, and oil change procedures for your 2017 Honda Civic.

Quick answer

• 1.5L Turbo Engine (FC1/FC3/FC4 Chassis - Coupe, Sedan, Hatchback):

  • Oil Capacity: 3.7 US Quarts (3.5 Liters) with filter change.
  • Recommended Oil: 0W-20 Full Synthetic engine oil.
  • Oil Specification: API H-M or Honda HFS-A. Look for API SN PLUS or SP ratings for the most up-to-date protection.
  • Oil Filter (OEM Part Number): 15400-PLM-A02 or 15400-PLM-A01
    • Aftermarket Cross-Reference:
      • Fram: PH7317
      • Wix: 51356
      • Mobil 1: M1-110

• 2.0L Naturally Aspirated Engine (FC2/FC5 Chassis - Sedan, Coupe):

  • Oil Capacity: 4.2 US Quarts (4.0 Liters) with filter change.
  • Recommended Oil: 0W-20 Full Synthetic engine oil.
  • Oil Specification: API H-M or Honda HFS-A. Look for API SN PLUS or SP ratings for the most up-to-date protection.
  • Oil Filter (OEM Part Number): 15400-PLM-A02 or 15400-PLM-A01
    • Aftermarket Cross-Reference:
      • Fram: PH7317
      • Wix: 51356
      • Mobil 1: M1-110

Capacity by engine option

Oil change interval

Honda recommends using the Maintenance Minder System to determine the optimal oil change interval for your 2017 Civic. This system takes into account driving conditions and duration. However, general guidelines are:

• Normal Duty: Typically every 7,500 - 10,000 miles or 12 months, whichever comes first, when using recommended synthetic oil.
• Severe Duty: If you frequently drive in extreme temperatures, tow, drive in dusty conditions, or make short trips, consider changing your oil every 3,000 - 5,000 miles or 6 months.

Always monitor your Maintenance Minder system; it will display a wrench icon and a code (e.g., A1, B1) indicating when service is due.

Drain plug torque

The oil drain plug on the 2017 Honda Civic should be torqued to 29 lb-ft (39 N-m). Always use a new crush washer with each oil change to ensure a proper seal and prevent leaks. The OEM crush washer part number is typically 94109-14000.

How to change the oil

1. Warm up the engine: Drive the car for a few minutes to get the oil to operating temperature, ensuring it drains more easily.
2. Lift and secure: Safely lift the front of the vehicle using a jack and secure it with jack stands.
3. Locate drain plug: Place a drain pan underneath the oil pan. Identify the drain plug and remove it with an appropriate wrench (typically a 17mm socket).
4. Drain oil and replace crush washer: Allow all the old oil to drain completely. Replace the crush washer on the drain plug.
5. Reinstall drain plug: Reinstall the drain plug and torque it to 29 lb-ft (39 N-m).
6. Remove oil filter: Move the drain pan under the oil filter location. Unscrew the old oil filter (a cap-style oil filter wrench may be needed).
7. Prepare new filter: Apply a thin layer of new oil to the rubber gasket of the new oil filter.
8. Install new filter: Thread the new oil filter on by hand until snug, then tighten an additional 3/4 to 1 full turn (or according to filter manufacturer instructions). Do not overtighten.
9. Add new oil: Lower the vehicle. Locate the oil filler cap on top of the engine and add the recommended amount and type of new oil.
10. Check oil level: Start the engine and let it run for a few minutes. Turn it off, wait 5 minutes, and then check the oil level using the dipstick. Add more oil if necessary.
11. Reset Maintenance Minder: Follow your owner's manual for instructions on how to reset the oil life monitor.

Common issues / tips

• Turbocharger Maintenance (1.5L engine): The 1.5L turbocharged engine is sensitive to oil quality and change intervals. Adhering to the recommended synthetic 0W-20 oil and timely changes is crucial for turbo longevity.
• Fuel Dilution (1.5L engine): Some 1.5L turbo engines in certain driving conditions (short trips, cold climates) can experience fuel dilution in the engine oil. While Honda has issued software updates, frequent oil changes (especially under severe duty) can help mitigate this. Follow your Maintenance Minder closely.
• Oil Filter Location: The oil filter on the 10th generation Civic is easily accessible from beneath the vehicle, making oil changes relatively straightforward.
• Check for Leaks: After completing the oil change, always inspect for any leaks around the drain plug and oil filter.

Need an oil change? Find a trusted shop on Repairius.