2024 Honda Civic Bulb Sizes (Headlight, Tail, Fog)

Quick reference

The 2024 Honda Civic, renowned for its reliability and modern design, offers a mix of LED and halogen lighting depending on the trim level. Understanding the specific bulb sizes and types for your Civic is crucial for maintenance, repairs, and upgrades.

For most 2024 Civic models, particularly the higher trims, the low beam and high beam headlights will feature integrated LED units. These are typically non-replaceable diode assemblies, meaning that if a headlight fails, the entire housing may need to be replaced. However, some lower trims may still utilize halogen bulbs. For these halogen-equipped Civics, the low beam typically uses an H11 bulb, while the high beam uses a 9005 bulb. It's essential to check your specific trim level and owner's manual to confirm your headlight type.

Fog lights, when equipped, commonly use an H8 halogen bulb across most trims. The Daytime Running Lights (DRL) often mirrors the headlight technology, being either integrated LED units or, on halogen-equipped models, a 7440 bulb.

Moving to the turn signals, both the front turn signals and rear turn signals typically use a 7440A incandescent bulb. However, some higher trim levels may feature LED turn signals, which are typically integrated and not designed for bulb replacement.

The brake lights and tail lights on the 2024 Civic are predominantly LED, featuring non-replaceable diode setups for longevity and efficiency.

For the reverse lights, a 921 incandescent bulb is commonly used. The license plate lights typically utilize a 168 incandescent bulb, providing clear illumination for your rear plate. Side marker lights usually take a 194 incandescent bulb.

Inside the cabin, the dome light can vary. Higher trims often come with LED dome lights, which are integrated. Lower trims, however, might use a 3175 festoon-type incandescent bulb. Similarly, map lights also vary, with LED units in premium trims and 168 wedge-type incandescent bulbs in others.

LED vs Halogen Upgrade Considerations

If your 2024 Honda Civic is equipped with halogen bulbs and you're considering upgrading to LEDs, there are several factors to keep in mind. While LED bulbs offer brighter illumination, longer lifespan, and lower power consumption, they can sometimes lead to CANBUS errors. This occurs when the vehicle's computer system detects a difference in resistance from the new LED bulbs, interpreting it as a burnt-out bulb. To avoid this, you may need to install inline resistors or CANBUS-compatible LED bulbs.

Additionally, some LED conversions may require specific adapters or decoders for proper fitment and to prevent hyper-flashing (rapid blinking) in turn signals. Always ensure that any aftermarket LED bulbs you purchase are designed to be compatible with your 2024 Civic's electrical system.

How to Replace Each Bulb

General Tip: Always consult your owner's manual for specific instructions and safety precautions before attempting any bulb replacement. Disconnect the battery if working near electrical components.

• Headlights (Halogen): Access is usually from behind the headlight assembly in the engine bay. Twist to unlock the bulb, disconnect the electrical connector, and remove. Install the new bulb in reverse order, ensuring not to touch the glass of the halogen bulb.
• Fog Lights: Often accessed from underneath the front bumper or through the wheel well lining. A few screws or clips usually grant access.
• Turn Signals (Front/Rear): Typically accessed by twisting the bulb socket out of the housing. Be gentle with the wiring harness.
• Reverse Lights: Usually accessed by opening the trunk and removing a trim panel to reach the tail light assembly.
• License Plate Lights: Often involves removing a couple of screws that hold the light housing in place.
• Side Markers: May require prying out the lens with a plastic trim tool.
• Dome/Map Lights: Carefully pry off the lens cover with a plastic trim tool to access the bulb.

Common Lighting Issues for This Generation

For the 2024 Honda Civic, common lighting issues are relatively minimal due to the increased use of LED technology. However, if equipped with halogen bulbs, premature burnout can occasionally occur. With LED systems, while less common, an entire LED module failure would necessitate replacing the whole assembly, which can be more costly than a simple bulb swap.

Another potential issue, especially with aftermarket LED conversions, is the aforementioned CANBUS error, leading to dashboard warnings or improper bulb function. Ensure proper installation and use of compatible components to mitigate this.

Find a trusted shop on Repairius.