2019 Honda CR-V Coolant Capacity & Type
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2019 Honda CR-V? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
The 2019 Honda CR-V cooling system holds approximately 6.9 quarts (6.5 liters) of coolant.
Quick Answer
- Total Cooling System Capacity: 6.9 quarts (6.5 liters)
- OEM Coolant Spec: Honda Long-Life Antifreeze/Coolant Type 2 (Blue, P-OAT Hybrid Coolant)
- Mix Ratio: 50/50 Pre-mix (do not add water)
Capacity by Engine Option
All 2019 Honda CR-V models, regardless of engine option (2.4L naturally aspirated or 1.5L turbocharged), share the same cooling system capacity.
| Engine Type | Capacity (Quarts) | Capacity (Liters) |
|---|---|---|
| 2.4L DOHC i-VTEC (CRV LX) | 6.9 | 6.5 |
| 1.5L DOHC Turbo (CRV EX, EX-L, Touring) | 6.9 | 6.5 |
Flush Interval
Honda recommends the initial coolant flush and replacement at 120,000 miles or 10 years, whichever comes first. Subsequent coolant changes are recommended every 60,000 miles or 5 years under normal driving conditions. For severe duty, it is wise to consider changing the coolant more frequently, possibly at 30,000 miles or 3 years.
How to Refill & Bleed
Refilling and bleeding the cooling system on your 2019 Honda CR-V is crucial to prevent air pockets, which can cause overheating. Here's a general procedure:
- Safety First: Ensure the engine is completely cool before starting.
- Drain Old Coolant: Locate the radiator drain plug (usually at the bottom of the radiator) and carefully open it to drain the old coolant into a suitable container.
- Flush (Optional but Recommended): For a thorough flush, you can run distilled water through the system until it comes out clear. Then drain. Do not use tap water.
- Close Drain Plug: Securely close the radiator drain plug.
- Refill: Slowly pour the correct Honda Long-Life Antifreeze/Coolant Type 2 (50/50 pre-mixed) into the radiator filler neck. Fill until it reaches the brim.
- Fill Reservoir: Fill the coolant reservoir to the "MAX" line.
- Bleed the System:
- Leave the radiator cap off or slightly loose.
- Start the engine and let it run with the heater on full blast (hot, fan speed low). This opens the heater core valve and helps circulate coolant.
- Squeeze the upper and lower radiator hoses periodically to help dislodge air bubbles.
- Watch for air bubbles rising to the radiator filler neck. You may need to rev the engine slightly (to about 2000-3000 RPM) for short durations to help push out air.
- Continuously top off the radiator with coolant as the level drops due to air escaping.
- Continue this process until no more bubbles appear and the coolant level stabilizes. This can take 15-30 minutes or more.
- Final Touches: Once stable, install the radiator cap securely. Check the coolant level in the reservoir after the engine cools down completely on subsequent drives, topping off as needed.
Specific Note for CR-V: The 2019 Honda CR-V
More specs for the 2019 Honda CR-V
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2019 Honda CR-V Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.