2019 Honda CR-V Wiper Blade Sizes & Replacement Guide

Ensuring your 2019 Honda CR-V has fresh, reliable wiper blades is essential for maintaining clear visibility and safety during rain, snow, and sleet. As a popular and versatile compact SUV, the CR-V requires specific blade lengths and attachment styles for optimal windshield clearing.

Below is your complete guide to replacing the wiper blades on a 2019 Honda CR-V, including OEM part numbers, aftermarket recommendations, and installation steps.

Quick reference

Position	Length (in)	Length (mm)	Attachment	OEM PN
Driver	26"	650 mm	J-Hook	76620-TLA-A02
Passenger	17"	425 mm	J-Hook	76630-TLA-A02
Rear	12"	300 mm	Roc Loc 3 / Rear Custom	76730-TLA-A02

Note: Always verify part numbers with your local dealership based on your specific trim level, as OEM numbers can supersede over time.

Best aftermarket replacements

If you prefer to upgrade from the factory wiper blades or want a quick replacement from your local auto parts store, several premium aftermarket brands manufacture excellent blades for the 2019 Honda CR-V. Here are some of the top picks:

• Bosch ICON: (Premium price tier) A top-tier beam blade known for its long life, quiet operation, and excellent performance in extreme weather conditions.
• Rain-X Latitude: (Premium price tier) Features a water-repellent coating that transfers to your windshield, helping water bead up and roll off at highway speeds.
• Trico Force: (Mid-to-premium price tier) Designed with a swept-wing spoiler to keep the blade pressed firmly against the glass, reducing wind lift at high speeds.
• Michelin Stealth: (Mid price tier) A hybrid blade design that combines the pressure points of a conventional blade with the sleek, snow-shedding cover of a beam blade.
• PIAA Si-Tech: (Premium price tier) Uses silicone rubber rather than traditional organic rubber, providing exceptional durability and continuous water-repellent protection.

Attachment style

The 2019 Honda CR-V makes replacing the front wiper blades incredibly simple by utilizing the standard J-hook attachment style. This is the most common wiper arm connection, shaped exactly like a "J." The wiper blade simply slides into the hook and clicks into place.

The rear wiper blade uses a specialized rear attachment (often referred to as a Roc Loc 3 or custom snap-in type) common to modern SUVs. You will typically need a dedicated rear wiper blade rather than a standard universal blade.

How to install

Replacing the wiper blades on your CR-V is a straightforward DIY task that takes just a few minutes.

Front Wipers (J-Hook):

1. Turn off your vehicle and lift the wiper arm away from the windshield until it locks in the upright position.
2. Locate the small tab or button where the blade meets the J-hook on the wiper arm.
3. Press the tab and slide the old wiper blade down toward the base of the wiper arm to unhook it.
4. Remove the old blade.
5. Take your new blade, align the J-hook adapter with the hook on the arm, and pull the blade up into the hook until you hear a firm "click."
6. Gently lower the wiper arm back onto the windshield.

Rear Wiper:

1. Lift the rear wiper arm away from the glass.
2. Rotate the old blade away from the arm until it unsnaps from the C-shaped clip in the center.
3. Snap the new rear blade firmly into the center pivot pin.
4. Gently lower the arm back to the glass.

When to replace

For optimal safety, you should replace your wiper blades every 6–12 months. Rubber naturally degrades over time due to UV exposure, extreme temperatures, and road debris. You know it is time for a replacement if you experience:

• Streaking: Leaving bands of water across your line of sight.
• Chattering: Skipping or shuddering across the glass, causing a loud dragging noise.
• Smearing: Spreading water around instead of clearing it, usually caused by worn rubber edges.

Need wipers swapped fast? Find a shop on Repairius.