Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Serpentine Belt Routing & Length

    2015 Honda Odyssey Serpentine Belt

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2015 Honda Odyssey? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick Answer

    • Belt Length: 2415mm
    • Rib Count: 7-rib
    • OEM Belt PN: 31110-RV0-A02
    • Aftermarket Cross-refs: Gates K070951, Dayco 5070950, Continental Elite 4070950
    • Auto-tensioner PN: 31170-RV0-A02
    • Idler Pulley PN: 31185-RV0-A01

    Belt Routing

    Before removing the old belt, we strongly recommend taking a photo of the serpentine belt routing for reference. The 2015 Honda Odyssey with the 3.5L V6 engine has the following belt routing:

    1. Starting from the crankshaft pulley at the bottom.
    2. The belt goes up to the A/C compressor.
    3. Then, it goes around the idler pulley.
    4. From the idler pulley, the belt moves to the alternator.
    5. Next, it routes to the power steering pump.
    6. Then, it goes around the water pump.
    7. Finally, the belt goes to the tensioner before returning to the crankshaft pulley.

    How to Replace the Serpentine Belt

    To replace the serpentine belt on your 2015 Honda Odyssey, you will need a serpentine belt tool or a 3/8" breaker bar. Locate the auto-tensioner, which is a spring-loaded pulley designed to keep the belt tight. Insert the tool into the designated slot on the tensioner and rotate it to release the tension on the belt. Once the tension is off, you can slip the belt off the pulleys. When installing the new belt, make sure it is correctly seated in all the pulley grooves before releasing the tensioner.

    Replacement Interval

    The recommended replacement interval for the serpentine belt on a 2015 Honda Odyssey is typically around 60,000 to 100,000 miles. However, it is always a good idea to inspect the belt regularly for signs of wear and tear.

    Signs of a Failing Belt or Tensioner

    • Squealing or Chirping Noises: This is one of the most common signs of a worn belt.
    • Visible Wear: Look for cracks, fraying, or missing ribs on the belt.
    • Accessory Malfunctions: If you notice your A/C, power steering, or charging system acting up, it could be a sign of a failing belt.
    • Tensioner Noise: A bad tensioner can cause a rattling or grinding noise.
    • Excessive Belt Vibration: If the belt appears to be vibrating more than usual, the tensioner may be failing.

    If you are not comfortable replacing the serpentine belt yourself, find a trusted shop on Repairius.

    Need service on your Honda Odyssey?

    Request service from shops in your area.

    More specs for the 2015 Honda Odyssey

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email