Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Torque Specifications

    2015 Honda Odyssey Torque Specifications

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2015 Honda Odyssey? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick Reference

    FastenerTorque (ft-lb / Nm)Notes
    Wheel Lug Nuts94 ft-lb / 127 Nm
    Oil Drain Plug33 ft-lb / 45 Nm
    Transmission Drain Plug36 ft-lb / 49 Nm
    Front Brake Caliper Bracket Bolts79.6 ft-lb / 108 Nm
    Front Brake Caliper Slide Pins36 ft-lb / 49 Nm (upper), 25 ft-lb / 34 Nm (lower)
    Rear Brake Caliper Bracket Bolts61 ft-lb / 83 Nm
    Rear Brake Caliper Slide Pins17 ft-lb / 23 Nm
    Axle Nut181 ft-lb / 245 NmStake nut after torquing
    Spark Plugs13 ft-lb / 18 NmUse anti-seize sparingly
    Valve Cover Bolts8.7 ft-lb / 12 Nm
    Intake Manifold Bolts16 ft-lb / 22 Nm

    Disclaimer: These torque specifications are for general reference only. Critical fasteners should always be verified in the complete OEM service manual for your specific vehicle.

    Wheel lug torque pattern

    When tightening the wheel lug nuts on your 2015 Honda Odyssey, it is crucial to use a star or cross pattern. This ensures even clamping force across the wheel hub, preventing warping of the brake rotor and ensuring the wheel is properly seated. Start with one lug nut, then tighten the one most directly opposite it. Continue this pattern until all lug nuts have been tightened to the specified torque.

    Brake torque notes

    Properly torquing brake components is critical for safety. The brake caliper bracket bolts are a high-torque fastener and must be tightened securely to prevent the caliper from coming loose. The caliper slide pins, on the other hand, require a much lower torque. Over-tightening can cause the pins to bind, leading to uneven pad wear and braking problems. Always use a calibrated torque wrench for these critical fasteners.

    Why torque matters

    Torque is a measure of rotational force. Applying the correct torque to a fastener is essential for a number of reasons. For a fastener to function correctly, it must be properly stretched. This creates a clamping force that holds the two parts together. If a fastener is under-torqued, it may not have enough clamping force to prevent it from loosening over time due to vibration and other forces. If a fastener is over-torqued, it can be permanently damaged, and the clamping force may actually be less than if it were properly torqued. This can lead to a catastrophic failure of the part. In a worst-case scenario over-torquing can cause a fastener to break.

    Find a trusted shop on Repairius.

    Need service on your Honda Odyssey?

    Request service from shops in your area.

    More specs for the 2015 Honda Odyssey

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email