2019 Honda Odyssey Wiper Blade Sizes

Quick Reference

Best Aftermarket Replacements

Choosing the right wiper blade can make a significant difference in visibility during rain, snow, or sleet. The 2019 Honda Odyssey uses very common sizes, making it easy to find great aftermarket options. Here are some of the most popular choices across different price points:

• Premium Tier (typically $25-$35 per blade):

  • Bosch ICON: A long-time favorite, known for its bracketless beam design that applies even pressure across the entire blade for a clean, consistent wipe. Its advanced rubber compound technology provides excellent all-weather performance and a long lifespan.
  • PIAA Si-Tech: These silicone blades are extremely durable and apply a water-repellent barrier to the windshield, causing rain to bead up and roll off. While they are often the most expensive option, their longevity and performance can justify the cost.

• Mid-Range Tier (typically $20-$28 per blade):

  • Rain-X Latitude Water Repellency: This popular beam-style blade not only clears water effectively but also applies a Rain-X water-repelling coating to the windshield with each wipe, improving visibility even when the wipers are off.
  • Trico Force: A rugged and durable beam blade designed to perform well at high speeds, with a special airfoil that keeps it pressed against the glass.
  • Michelin Stealth Ultra Hybrid: Combining the focused pressure of a beam blade with the structural support of a conventional frame, this hybrid design performs well in all seasons, especially in heavy snow.

Attachment Style

The 2019 Honda Odyssey uses a standard 9x3mm or 9x4mm J-hook attachment for both the driver and passenger side front wipers. This is the most common type of wiper arm, and virtually every aftermarket blade will come with the correct adapter pre-installed. The rear wiper is more specialized, using a Roc Loc 3 style arm. Most aftermarket rear wipers designed for the Odyssey will include the specific adapter required to fit this unique connection.

How to Install

Replacing the front wiper blades is a straightforward process.

1. Lift the wiper arm away from the windshield until it locks in the upright position.
2. Locate the small plastic tab where the blade connects to the J-hook arm.
3. Press or pivot the tab to release the lock.
4. Slide the old wiper blade down and off the hook.
5. Slide the new wiper blade onto the hook until you hear a distinct "click," which confirms it is securely locked in place.
6. Carefully lower the arm back onto the windshield.

For the rear wiper, the process involves unclipping the plastic cover and sliding the old blade off its mount. The new blade will slide and click into place. Always refer to the instructions included with your new blades, especially for the rear, as the specific adapter may have a slightly different installation process.

When to Replace

Wiper blades are a critical safety component, yet they are often neglected. For optimal performance and safety, you should replace your wiper blades every 6 to 12 months. However, your environment and usage will dictate the true replacement interval. It's time for a new set if you notice any of the following signs:

• Streaking: The blade is no longer making complete contact with the windshield.
• Chattering or Skipping: The blade is skipping or vibrating across the glass instead of gliding smoothly.
• Squeaking: The rubber has become hardened or worn.
• Visible Damage: Check for cracked, torn, or brittle rubber along the blade edge.

Need wipers swapped fast? Find a shop on Repairius.