Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Key Fob Programming

    2025 Honda Odyssey Key Fob Programming

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2025 Honda Odyssey? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick reference

    ItemDetail
    FCC IDCIKR81C
    OEM Fob PN72147-THR-A01
    Aftermarket OptionsStrattec 5942485, Dorman 13745
    Battery TypeCR2032
    Programmable On-Board?No (Requires HDS or compatible scan tool)
    Cuts Required?Yes (Emergency key blade)

    Step-by-step on-board programming

    Unfortunately, the 2025 Honda Odyssey does not support DIY on-board programming for its key fobs. The sophisticated immobilizer system and keyless entry features require specialized equipment for programming. This will involve using a Honda Diagnostic System (HDS) or an equivalent professional-grade scan tool to link new fobs to your vehicle's computer.

    This is a common security measure in newer vehicles to prevent unauthorized key duplication and vehicle theft. Therefore, you'll need to visit a Honda dealership or a qualified automotive locksmith to have a new key fob programmed.

    Battery replacement

    1. Locate the small release button or tab on the side of the key fob. Press or slide it to release the emergency key blade. Pull the key blade out.
    2. With the emergency key removed, you'll see a slot on the side of the fob. Insert a small flathead screwdriver or a coin into this slot and gently pry the two halves of the fob apart.
    3. Carefully separate the two halves. You will see the circuit board and the CR2032 coin cell battery.
    4. Note the orientation of the old battery (usually positive side facing up). Gently pry the old battery out with a small non-metallic tool.
    5. Insert the new CR2032 battery with the positive (+) side facing up.
    6. Align the two halves of the key fob and press them together until they snap securely into place.
    7. Reinsert the emergency key blade.

    Where to buy a replacement fob

    • Honda Dealership:

      • Pros: Guaranteed genuine Honda part, professional programming, and typically comes with a warranty.
      • Cons: Most expensive option. Expect to pay between $200-$400 for the fob itself, plus an additional hour of labor for programming (typically $100-$150).
    • Automotive Locksmith:

      • Pros: Often more affordable than a dealership. Many locksmiths have the necessary programming tools and can cut emergency key blades on-site. They may also offer aftermarket options.
      • Cons: Quality of aftermarket fobs can vary. Ensure the locksmith is reputable and provides a warranty on their work and parts. Expect to pay around $150-$300 for a fob and programming.
    • Online Retailers (e.g., Amazon, eBay):

      • Pros: Cheapest option for the physical fob. You can find genuine OEM fobs and a wide variety of aftermarket alternatives.
      • Cons: You still need to arrange for programming and key cutting separately, which adds to the overall cost and hassle. Many online sellers do not offer returns if the fob cannot be programmed to your vehicle. This option is only recommended if you are confident that the part number matches and you have a reliable locksmith or dealer willing to program a customer-supplied fob (some may refuse).

    If on-board programming isn't supported

    Since the 2025 Honda Odyssey requires specialized equipment for key fob programming, you'll need to factor in the cost of a professional service. This cost typically includes both the new key fob and the programming fee.

    All modern Honda vehicles utilize a sophisticated immobilizer system where a transponder chip embedded in the key fob (or emergency key blade) must be recognized by the vehicle's immobilizer control unit. Without proper programming, even a correctly cut emergency key blade will not start the car, and the remote functions will not work. The 2025 Odyssey uses a rolling code encryption for enhanced security, which is why a professional scan tool is essential for linking new fobs.

    Expect the total cost (fob + programming) to range from $150 to $450, depending on whether you go to a locksmith or a dealership and if you opt for an OEM or quality aftermarket fob.

    Find a mobile locksmith or shop on Repairius.

    Need service on your Honda Odyssey?

    Request service from shops in your area.

    More specs for the 2025 Honda Odyssey

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email