2025 Honda Odyssey Oil Capacity & Filter

The 2025 Honda Odyssey takes 5.7 quarts (5.4 liters) of 0W-20 engine oil.

Quick Answer

• Oil Capacity: 5.7 quarts (5.4 liters) with filter change
• Recommended Oil Weight: 0W-20
• Oil Type Specification: API Premium Grade Drained and Refilled Only, or a Honda HFE-20 approved oil (Consult your owner's manual for the most up-to-date specification)
• OEM Oil Filter Part Number: Consult dealer for the most current part number for the 2025 model year.
  • Fram Cross-Reference: Consult Fram catalog for the most current cross-reference.
  • Wix Cross-Reference: Consult Wix catalog for the most current cross-reference.
  • Mobil 1 Cross-Reference: Consult Mobil 1 catalog for the most current cross-reference.

Capacity by Engine Option

For the 2025 Honda Odyssey, all trims are equipped with a single engine option:

Oil Change Interval

Honda recommends using the Maintenance Minder System to determine the optimal oil change interval for your 2025 Odyssey. This intelligent system monitors various driving conditions and engine parameters to notify you when an oil change is due, typically indicated by a "B1" service code on your dashboard. However, general guidelines are:

• Normal Duty: Approximately every 7,500 to 10,000 miles or 12 months, whichever comes first, as indicated by the Maintenance Minder.
• Severe Duty: If you frequently drive in demanding conditions such as extreme temperatures, stop-and-go traffic, towing, or dusty environments, your Maintenance Minder may recommend an oil change sooner, potentially around 5,000 miles.

Always adhere to the Maintenance Minder system for the most accurate and personalized oil change schedule.

Drain Plug Torque

The oil drain plug for the 2025 Honda Odyssey should be torqued to 29 lb-ft (39 N·m). Always use a new crush washer with every oil change to ensure a proper seal and prevent leaks. The crush washer is a single-use item and deforms to create the seal.

How to Change the Oil

Changing the oil on your 2025 Honda Odyssey can be a straightforward DIY task. Here’s a simplified step-by-step guide:

1. Warm Up Engine: Drive the vehicle for a few minutes to bring the oil to operating temperature, which helps it drain more easily.
2. Lift and Secure: Safely lift the front of the vehicle using a jack and support it with jack stands on a level surface.
3. Locate Drain Plug: Place a drain pan beneath the oil pan, then locate and carefully remove the drain plug with a wrench.
4. Drain Oil: Allow all the old oil to completely drain into the pan.
5. Replace Crush Washer & Plug: Install a new crush washer on the drain plug and reinstall the plug, tightening it to 29 lb-ft (39 N·m).
6. Remove Oil Filter: Locate the oil filter, place a drain pan underneath it, and unscrew it. Be prepared for a small amount of oil to spill.
7. Install New Filter: Apply a thin film of new oil to the rubber gasket of the new filter. Screw on the new oil filter hand-tight, then tighten an additional 3/4 to 1 full turn (or follow filter manufacturer