2023 International MV: Paint Codes and Color Reference

Quick Reference

Note: International offers a wide range of custom colors. The codes above represent the most common factory options. If your color isn't listed, it may be a custom fleet color. Always verify your specific paint code before ordering.

Where to Find Your Paint Code

For the International MV, you will typically find the paint code on the Customer Application Label, which is a sticker located on the driver-side door jamb or B-pillar. Look for a section labeled "PAINT" or "EXTERIOR PAINT." The code will be a four-digit number, often following the color name. If the label is missing or illegible, your local International dealer can retrieve the paint code and other vehicle specifications using your Vehicle Identification Number (VIN).

Best Touch-Up Paint Sources

Once you have your four-digit paint code, finding the right touch-up paint is straightforward. Here are some of the most reliable sources:

• AutomotiveTouchup: This online retailer is an excellent source for precision-matched paint. They offer paint pens, brush-in bottles, and aerosol cans for virtually every factory color. They can mix paint based on the OEM code to ensure a great match.
• Tcoat Custom-Mix: Many automotive paint supply stores, like those that carry the Tcoat brand, can mix your specific color in an aerosol can or a bottle while you wait. This is a great option if you need the paint immediately.
• International Dealer: Your local dealer parts department can order touch-up paint directly from the manufacturer. This guarantees an OEM-quality match but may be a more expensive option.
• Dupli-Color: While Dupli-Color offers a wide range of common colors for passenger cars, they have limited support for commercial truck colors. It's best to rely on one of the custom-mix sources above for a commercial vehicle like the International MV.

How to Use Touch-Up Paint

Achieving a professional-looking repair requires patience and the right process. Follow these steps for the best results:

1. Clean: Thoroughly wash the chipped or scratched area with soap and water, then use a wax and grease remover or isopropyl alcohol to ensure the surface is completely clean.
2. Primer: If the scratch has gone down to bare metal or plastic, apply a thin layer of automotive primer. This helps the paint adhere properly and prevents rust. Let it dry completely.
3. Base Coat: Shake the paint pen or bottle thoroughly. Apply a thin, even layer of the colored base coat. For larger areas, use very light passes with an aerosol can. It's better to apply two or three very thin coats than one thick, heavy coat. Allow each coat to dry according to the manufacturer's instructions (usually 20–30 minutes).
4. Clear Coat: After the final base coat is dry, apply one or two thin layers of clear coat. This protects the color from UV rays and adds gloss, helping it blend with the surrounding factory paint.

Color Matching Tips for Metallics

Metallic and pearl finishes can be more challenging to match perfectly because the metallic flakes in the paint can settle or spray differently than the factory application.

• Blend, Blend, Blend: For aerosol repairs, use a blending technique where you spray slightly beyond the repaired area, feathering the new paint into the old. This creates a smoother transition.
• Spray-Out Card: Before applying paint to the truck, do a test spray on a piece of paper or a spare part. This helps you check the color match and practice your spray technique.
• Correct Angle: When using an aerosol, hold the can at the same angle as the panel you are painting to ensure the metallic flakes lay down correctly and reflect light uniformly.

For major damage or if you are unsure about the repair process, it's always best to consult a professional.

Find a trusted body shop on Repairius.