2025 International MV Tire Size & Pressure
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2025 International MV? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick Answer
- OEM Tire Sizes: Varies significantly by configuration and intended use, commonly 11R22.5, 295/75R22.5, or 315/80R22.5. Consult your specific vehicle's door jamb placard.
- Recommended Cold Tire Pressure (Door Placard): Highly dependent on axle loads, tire size, and application. Refer to your vehicle's door jamb placard for precise front and rear recommendations. Pressures can range from 80 PSI to 120 PSI or higher.
- Bolt Pattern: Typically 10-lug (10x285.75mm or similar commercial patterns).
- Wheel Size: Typically 22.5 inches in diameter, with various widths (e.g., 8.25", 9.00").
- Load Index/Speed Rating: Will be exceptionally high, reflecting heavy-duty truck requirements. Load indexes often exceed 140, and speed ratings are typically J (62 mph) or K (68 mph).
- Spare Tire Size: Often not provided as a full-size spare; roadside assistance or a repair kit is more common. If equipped, it will match an OEM drive tire size.
- TPMS Frequency: Typically 433 MHz for heavy-duty commercial applications, but always verify with your vehicle's spec sheet or a diagnostic tool.
Tire Sizes by Trim
The International MV is a highly customizable medium-duty truck, and tire sizes are not typically broken down by "trim" in the same way as passenger vehicles. Instead, tire sizes are determined by factors such as:
- Gross Vehicle Weight Rating (GVWR): Higher GVWRs necessitate larger, higher-capacity tires.
- Axle Specifications: Front and rear axle weight capacities directly influence tire requirements.
- Application: Hauling, vocational use (e.g., dump truck, utility truck), and specific industry requirements will dictate appropriate tire choices.
- Wheelbase and Chassis Configuration: These can impact tire clearance and selection.
Common OEM tire sizes for the International MV may include:
| Tire Size | Application Examples |
|---|---|
| 11R22.5 | General hauling, regional delivery, utility |
| 295/75R22.5 | Highway use, fuel efficiency-focused applications |
| 315/80R22.5 | Heavy front axle loads, vocational, severe service |
| 12R22.5 | Specialized heavy-duty applications |
Always consult the tire placard on your specific International MV for the exact OEM tire size and recommended inflation pressures.
Recommended Replacement Tires
Selecting replacement tires for a commercial vehicle like the International MV requires careful consideration of the vehicle
More specs for the 2025 International MV
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Torque Specifications
Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2025 International MV Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.