2016 Jeep Cherokee Torque Specifications
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2016 Jeep Cherokee? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel Lug Nuts | 100 ft-lb (135 Nm) | Star/Cross pattern |
| Oil Drain Plug | 20-25 ft-lb (27-34 Nm) | Verify engine type |
| Transmission Drain Plug | 15-22 ft-lb (20-30 Nm) | Automatic/Manual |
| Front Brake Caliper Bracket Bolts | 85-95 ft-lb (115-129 Nm) | |
| Rear Brake Caliper Bracket Bolts | 85-95 ft-lb (115-129 Nm) | |
| Front Brake Caliper Slide Pins | 20-25 ft-lb (27-34 Nm) | |
| Rear Brake Caliper Slide Pins | 20-25 ft-lb (27-34 Nm) | |
| Front Axle Nut | 118-130 ft-lb (160-176 Nm) | One-time use, replace |
| Spark Plugs | 10-13 ft-lb (14-18 Nm) | 2.4L Tigershark MultiAir engine and 3.2L Pentastar V6 |
| Valve Cover Bolts | 7-9 ft-lb (9-12 Nm) | Evenly tighten in sequence |
Wheel lug torque pattern
When tightening the wheel lug nuts on your 2016 Jeep Cherokee, always use a star or cross pattern. This ensures the wheel is seated properly against the hub, preventing uneven pressure and potential wheel distortion. Tighten the nuts in stages, gradually increasing the torque until the final specification is reached. Aim for 100 ft-lb (135 Nm) for optimal security.
Brake torque notes
Brake components are critical for your safety, and proper torque is paramount. When servicing the brakes on your 2016 Jeep Cherokee, pay close attention to the torque specifications for all fasteners. Brake caliper bracket bolts, both front and rear, typically require 85-95 ft-lb (115-129 Nm). Caliper slide pins, front and rear, are generally torqued to 20-25 ft-lb (27-34 Nm). Ensuring these fasteners are tightened to their exact specifications prevents premature wear, noise, and potential failure of the braking system. Always use a high-quality torque wrench and never overtighten, as this can strip threads or damage components. Rear disc brakes on some models will follow similar guidelines to the front. Always consult your specific service manual for exact procedures.
Why torque matters
Torque specifications are not arbitrary numbers; they are engineered values designed to ensure the safe and reliable operation of your vehicle. Under-tightening fasteners can lead to parts becoming loose, vibrating, and eventually falling off, creating dangerous driving conditions. Over-tightening, on the other hand, can strip threads, stretch bolts, or even crack components, leading to costly repairs and potential safety hazards. Critical components, such as those in the braking system, suspension, and engine, rely on precise torque to function correctly. Using a calibrated torque wrench and adhering to manufacturer specifications for your 2016 Jeep Cherokee is an essential part of proper vehicle maintenance and repair. It ensures that components are securely fastened without being overstressed, contributing to the longevity and safety of your vehicle. Remember that certain bolts, like axle nuts, are often single-use and require replacement after removal due to their stretching during initial torquing.
Disclaimer: Always consult your official OEM service manual for the most accurate and up-to-date torque specifications for your specific 2016 Jeep Cherokee model and engine configuration. This guide provides general reference values that may vary.
Find a trusted shop on Repairius.
More specs for the 2016 Jeep Cherokee
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2016 Jeep Cherokee Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.