2024 Jeep Gladiator Torque Specifications
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2024 Jeep Gladiator? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel Lug Nuts | 130 ft-lb (176 Nm) | For M14 x 1.5, conical seat lug nuts |
| Oil Drain Plug | 18-20 ft-lb (24-27 Nm) | Verify application, typically M14 x 1.5 or M22 x 1.5 |
| Transmission Drain Plug (Automatic) | 15-18 ft-lb (20-24 Nm) | ZF 8HP75 transmission |
| Transmission Drain Plug (Manual) | 20-25 ft-lb (27-34 Nm) | Aisin D478 transmission |
| Front Brake Caliper Bracket Bolts | 125 ft-lb (169 Nm) | Factory Loctite on threads is common |
| Rear Brake Caliper Bracket Bolts | 100 ft-lb (135 Nm) | Factory Loctite on threads is common |
| Front Brake Caliper Slide Pins | 26 ft-lb (35 Nm) | Lubed with high-temp grease |
| Rear Brake Caliper Slide Pins | 22 ft-lb (30 Nm) | Lubed with high-temp grease |
| Front Axle Nut | 160-170 ft-lb (217-230 Nm) | One-time use nut, requires new cotter pin |
| Rear Axle Nut | 120-130 ft-lb (163-176 Nm) | Dana 44 axles |
| Spark Plugs (3.6L V6) | 13 ft-lb (18 Nm) | M14 x 1.25 |
| Valve Cover Bolts (3.6L V6) | 88-106 in-lb (10-12 Nm) | Multi-stage tightening pattern |
| Intake Manifold Bolts (3.6L V6) | 100-110 in-lb (11-12 Nm) | Multi-stage tightening pattern |
Wheel lug torque pattern
For the 2024 Jeep Gladiator, a star pattern (or cross-pattern) should always be used when tightening wheel lug nuts. This ensures even seating of the wheel against the hub and prevents warping of the brake rotor or wheel. Lightly hand-tighten all lug nuts, then tighten in the star pattern in two or three stages until the final recommended torque is reached. Never use an impact gun for final tightening, as this can lead to over-torquing and damage.
Brake torque notes
When working on the brakes of your 2024 Jeep Gladiator, specific attention to torque is crucial for safety and performance. Caliper bracket bolts, in particular, are subject to significant forces and often come from the factory with thread locker applied. If removing these bolts, it's generally recommended to clean the threads thoroughly and apply new, equivalent thread locker (e.g., Loctite 243) before reinstallation. Caliper slide pins should always be lubricated with a high-temperature silicone-based grease to ensure smooth operation and prevent seizing. Always clean any old grease and debris from the slide pin bores before applying new lubricant and reinstalling. Incorrect torque on brake components can lead to loose parts, excessive wear, noise, and ultimately, brake failure.
Why torque matters
Torque specifications are not arbitrary numbers; they are engineered for a reason. Proper torque ensures that fasteners are tightened to the correct clamping force, which is essential for the reliable operation and safety of your 2024 Jeep Gladiator. Under-tightening can lead to fasteners loosening over time, potentially causing components to vibrate, wear prematurely, or even separate entirely. For example, an under-torqued wheel lug nut could lead to a wheel detaching from the vehicle.
Conversely, over-tightening can stretch and weaken bolts, leading to their failure. It can also damage the threads in the component that the bolt is threading into, or distort parts like brake rotors, wheel hubs, or engine components. Stripped threads are not only a nuisance but can be costly to repair. For critical components like engine internals, braking systems, and suspension, precise torque is non-negotiable.
Always use a calibrated torque wrench for all specified fasteners. Avoid relying solely on impact wrenches for final tightening, as they often apply inconsistent and excessive torque. Following these guidelines will contribute significantly to the longevity, reliability, and safety of your vehicle.
Disclaimer: The torque specifications provided are for informational purposes only. While every effort has been made to ensure accuracy, variances can occur due to specific sub-models, optional equipment, and production changes. Always consult the official OEM service manual for your specific 2024 Jeep Gladiator for the most accurate and up-to-date torque specifications, especially for critical safety-related fasteners.
Find a trusted shop on Repairius.
More specs for the 2024 Jeep Gladiator
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2024 Jeep Gladiator Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.