2020 Jeep Gladiator Torque Specifications
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2020 Jeep Gladiator? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel Lug Nuts | 130 ft-lb / 176 Nm | Ensure proper seating, follow star/cross pattern |
| Oil Drain Plug | 18-20 ft-lb / 24-27 Nm | For 3.6L Pentastar V6 engine |
| Transmission Drain Plug (850RE Auto) | 22 ft-lb / 30 Nm | Check fluid level after |
| Transmission Drain Plug (D478 Manual) | 25 ft-lb / 34 Nm | Check fluid level after |
| Front Brake Caliper Bracket Bolts | 129 ft-lb / 175 Nm | Use thread locker as specified by OEM |
| Rear Brake Caliper Bracket Bolts | 70 ft-lb / 95 Nm | Use thread locker as specified by OEM |
| Brake Caliper Slide Pins | 26 ft-lb / 35 Nm | Apply appropriate grease to slide pins |
| Front Axle Nut | 185 ft-lb / 251 Nm | Crimp staked nut after torquing |
| Rear Axle Nut | 100-110 ft-lb / 136-149 Nm | Confirm specific axle type for accurate value |
| Spark Plugs (3.6L Pentastar) | 9 ft-lb / 12 Nm | Use anti-seize compound as recommended |
| Valve Cover Bolts (3.6L Pentastar) | 105 in-lb / 12 Nm | Torque in sequence to ensure proper seal |
Wheel lug torque pattern
The 2020 Jeep Gladiator uses a common star or cross pattern for wheel lug nut torque. This ensures even clamping force across the wheel hub, preventing warping and loosening. Start by hand-tightening all lug nuts, then progressively torque them in increments following the star/cross pattern until the final specified torque is reached.
Brake torque notes
When working on the braking system of your 2020 Jeep Gladiator, precise torque is paramount. Brake caliper bracket bolts are critical safety fasteners. Always use new bolts or apply thread-locking compound as specified by the manufacturer. Brake caliper slide pins require proper lubrication to ensure smooth operation of the caliper; too little or too much torque can impede their movement, leading to uneven pad wear or braking issues. Always clean mating surfaces thoroughly before reassembly to ensure proper alignment and torque accuracy.
Why torque matters
Proper fastener torque is not merely a suggestion; it's a critical aspect of vehicle safety and longevity. Incorrectly torqued fasteners can lead to a multitude of problems. Undertorqued fasteners can loosen over time due to vibrations, potentially leading to components detaching, fluid leaks, or compromised structural integrity. This is especially dangerous in critical areas like wheels and brakes. On the other hand, over-torquing can stretch and weaken bolts, leading to premature failure, stripped threads, or even cracking of components. This can be equally detrimental, if not more so, as the component may fail unexpectedly. Adhering to manufacturer-specified torque values ensures that components are held together with the correct clamping force, optimizing performance, preventing unwanted movement, and guaranteeing the safety of your Jeep Gladiator and its occupants.
Disclaimer: Always consult the official 2020 Jeep Gladiator factory service manual for the most accurate and up-to-date torque specifications. The values provided here are for reference only and should be verified before performing any work on your vehicle. Critical fasteners absolutely require verification in the OEM service manual.
Find a trusted shop on Repairius.
More specs for the 2020 Jeep Gladiator
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2020 Jeep Gladiator Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.