Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Factory Maintenance Schedule

    2016 Jeep Grand Cherokee Factory Maintenance Schedule

    Keep your WK2 Grand Cherokee running at factory-spec with our complete mileage interval guide.

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2016 Jeep Grand Cherokee? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Keeping your 2016 Jeep Grand Cherokee (WK2 generation) running at peak performance requires strict adherence to its factory maintenance schedule. Whether you are daily driving the efficient 3.6L Pentastar V6 or towing with the robust 5.7L Hemi V8, staying on top of oil changes, fluid flushes, and filter replacements is the key to longevity.

    Below is the comprehensive factory-spec maintenance schedule for the 2016 Jeep Grand Cherokee.

    Quick reference

    FCA (Fiat Chrysler Automobiles) utilizes an automatic Oil Life Indicator system, which will alert you when an oil change is due. However, under normal driving conditions, oil changes should never exceed 10,000 miles or 12 months.

    MileageServiceNotes
    10,000 miles (or 1 yr)Oil & filter change, tire rotation, multi-point inspection.Check brake pads, rotors, and suspension components.
    20,000 miles (or 2 yrs)Replace cabin air filter, inspect brake fluid.Inspect tie rods, CV joints, and exhaust system.
    30,000 miles (or 3 yrs)Replace engine air filter, inspect transfer case & differential fluids.Air filter interval may be shorter in dusty environments.
    40,000 miles (or 4 yrs)Replace cabin air filter.Change front/rear differential & transfer case fluid if severe duty (police, taxi, towing).
    50,000 miles (or 5 yrs)Oil & filter change, tire rotation.Inspect exhaust and suspension systems.
    60,000 miles (or 6 yrs)Replace engine air filter, replace cabin filter, inspect accessory drive belt.Change transmission fluid if used for frequent towing/fleet (ZF 8-speed).
    70,000 miles (or 7 yrs)Oil & filter change, tire rotation.Standard checks.
    80,000 miles (or 8 yrs)Replace cabin air filter, inspect brake fluid.Flush brake fluid if moisture content is high.
    90,000 miles (or 9 yrs)Replace engine air filter, inspect transfer case & diffs.Replace accessory drive belt if cracked or worn.
    100,000 miles (or 10 yrs)Replace spark plugs, replace PCV valve, inspect timing chain.Replace differential and transfer case fluids (if not done at severe intervals).
    110,000 miles (or 11 yrs)Oil & filter change, tire rotation.Standard 10k service.
    120,000 miles (or 12 yrs)Replace cabin & engine air filters, inspect accessory belt.Consider transmission fluid service for longevity.
    130,000 miles (or 13 yrs)Oil & filter change, tire rotation.Standard checks.
    140,000 miles (or 14 yrs)Replace cabin air filter.Inspect suspension bushings and shocks.
    150,000 miles (or 15 yrs)Engine coolant flush, replace engine air filter, replace accessory drive belt.Mopar OAT coolant is rated for 10 years/150k miles.

    (Note: The 3.0L EcoDiesel has slightly different requirements, including fuel filter replacements every 20,000 miles and DEF refills as needed.)

    Severe-duty schedule

    If you operate your 2016 Jeep Grand Cherokee under "severe" conditions—which includes frequent short trips (under 10 miles), heavy towing, off-roading, excessive idling, or driving in extremely dusty, hot, or cold climates—you must accelerate your maintenance intervals:

    • Oil & Filter: Change every 4,000 to 5,000 miles. Do not wait for the oil life monitor.
    • Engine Air Filter: Inspect at every oil change; replace every 15,000 miles.
    • Transmission Fluid: While Chrysler states the ZF 8-speed transmission is "filled for life" under normal use, severe duty (towing, fleet) mandates a fluid and pan/filter replacement every 60,000 miles.
    • Transfer Case & Differentials: Change fluid every 40,000 miles if towing frequently or driving off-road.

    Known issues by mileage

    The WK2 generation Grand Cherokee is highly capable, but it does have a few quirks that technicians frequently see in the service bay:

    • 30,000 - 50,000 miles: Radiator leaks and water pump failures (particularly on the 3.6L Pentastar V6). Listen for squealing from the front of the engine and watch for low coolant levels.
    • 60,000 - 80,000 miles: Air suspension issues (if equipped with Quadra-Lift). Compressors can wear out, and air struts may develop leaks. Also, check the oil filter housing on the 3.6L V6—they are made of plastic and prone to cracking/leaking oil down into the engine valley.
    • 100,000+ miles: Hemi 5.7L "tick" caused by exhaust manifold bolts snapping or, more severely, camshaft/lifter wear. Transfer case shift motors can also fail, resulting in 4WD system errors.

    Estimated cost per service

    Prices vary based on location, engine type, and whether you use a dealership or an independent specialist.

    • 10k Service (Oil, filter, rotation): $80 - $120 (Synthetic oil)
    • 30k/60k Service (Filters, thorough inspections): $150 - $250
    • Brake Fluid Flush: $100 - $150
    • Transmission Fluid Service (ZF 8-speed): $400 - $650 (The pan and filter are one integrated unit).
    • 100k Service (Spark plugs, PCV, fluids): $300 - $500 for the V6; $400 - $600 for the V8 (which has 16 spark plugs).
    • 150k Service (Coolant flush, belts): $250 - $400

    What you can DIY vs shop

    DIY: The 2016 Grand Cherokee is very friendly for basic driveway maintenance.

    • Engine & Cabin Air Filters: Both can be swapped out in under 10 minutes with no special tools.
    • Oil Changes: Easy to access, especially on the 3.6L V6 where the cartridge oil filter is right on top of the engine.
    • Differential Fluids: Very straightforward drain and fill plugs, just ensure you use the correct synthetic gear oil (and limited-slip additive if your Jeep is equipped with ELSD).

    Shop:

    • Transmission Fluid Change: The ZF 8-speed requires a highly specific temperature-monitored fill procedure. It is best left to a professional with a scan tool.
    • Spark Plugs (V6): On the 3.6L Pentastar, the upper intake manifold plenum must be removed to access the driver's side spark plugs.
    • Coolant Flush: Ensuring all air is bled from the cooling system can be tricky without a vacuum filling tool.

    Keep your Jeep out on the trail and running reliably by staying strictly on schedule.

    Book service on Repairius.

    Need service on your Jeep Grand Cherokee?

    Request service from shops in your area.

    More specs for the 2016 Jeep Grand Cherokee

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email