Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Factory Maintenance Schedule

    2019 Jeep Grand Cherokee Factory Maintenance Schedule

    AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.

    Working on this 2019 Jeep Grand Cherokee? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick Reference

    MileageServiceNotes
    5,000Oil & filter change, tire rotationLube front & rear driveshafts
    10,000Oil & filter change, tire rotationLube front & rear driveshafts
    15,000Oil & filter change, tire rotationLube front & rear driveshafts
    20,000Oil & filter change, tire rotation, cabin air filter, inspect brakesLube driveshafts, inspect CV joints
    30,000Oil & filter change, tire rotation, engine air filterInspect transfer case fluid, front & rear axle fluid
    40,000Oil & filter change, tire rotation, cabin air filterInspect brakes, CV joints
    50,000Oil & filter change, tire rotationLube driveshafts
    60,000Oil & filter change, tire rotation, spark plugsInspect transfer case fluid, front & rear axle fluid, brake lines, CV joints
    70,000Oil & filter change, tire rotationLube driveshafts
    80,000Oil & filter change, tire rotation, cabin air filterInspect brakes, CV joints
    90,000Oil & filter change, tire rotationInspect transfer case fluid, front & rear axle fluid
    100,000Oil & filter change, tire rotation, spark plugs, PCV valveInspect accessory drive belt, transfer case fluid
    120,000Oil & filter change, tire rotation, cabin air filterTransmission service, transfer case fluid change
    150,000Oil & filter change, tire rotation, coolant flushInspect and replace accessory drive belt if not done yet

    Severe-duty schedule

    The manufacturer recommends a different maintenance schedule if your Grand Cherokee is subjected to "severe-duty" conditions. These include:

    • Towing a trailer
    • Driving in dusty or off-road conditions
    • Frequent short trips (under 5 miles)
    • Living in a cold climate (below 32°F or 0°C)

    If you fall into any of these categories, you should change your oil and filter every 4,000 miles. You should also inspect and service your brakes, axles, and suspension components more frequently.

    Known issues by mileage

    • 30,000-60,000 miles: Premature wear on front brake rotors and pads is a common complaint. Listen for squealing or grinding noises and inspect your brakes at every oil change. The 8-speed automatic transmission may also exhibit rough shifting; a software update from the dealer can often resolve this.
    • 60,000-100,000 miles: The water pump and thermostat housing are known to leak coolant. Keep an eye on your temperature gauge and check for coolant leaks under the vehicle. The Quadra-Lift air suspension system can also be a source of problems, with failing air springs and compressors being the most common issues.
    • 100,000+ miles: The timing chain on the 3.6L Pentastar V6 engine is a known failure point. A rattling noise on startup is a tell-tale sign of a worn timing chain. This is a major repair, so it's important to address it as soon as possible. The fuel pump is another item that may fail at higher mileage.

    Estimated cost per service

    • 5,000-mile service (oil change, tire rotation): $75-$150
    • 30,000-mile service (oil change, tire rotation, engine & cabin air filters): $250-$400
    • 60,000-mile service (includes spark plugs): $450-$700
    • 100,000-mile service (includes spark plugs, PCV valve): $500-$800
    • 120,000-mile service (includes transmission & transfer case service): $700-$1,200

    What you can DIY vs shop

    • DIY: Oil and filter changes, tire rotations, cabin and engine air filter replacements, and spark plug changes are all relatively easy jobs for the DIYer with basic hand tools.
    • Shop: Transmission service, coolant flushes, brake fluid flushes, and differential service are best left to the professionals. Timing belt or chain replacement is a complex job that should only be attempted by experienced technicians.

    Book service on Repairius.

    Need service on your Jeep Grand Cherokee?

    Request service from shops in your area.

    More specs for the 2019 Jeep Grand Cherokee

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email