Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Bulb Sizes (Headlight, Tail, Fog)

    2021 Kenworth W900 Bulb Sizes

    Comprehensive Bulb Size Chart and Replacement Guide for Your Big Rig

    Working on this 2021 Kenworth W900? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick Reference

    LocationBulb SizeType
    Low Beam HeadlightH11Halogen
    High Beam HeadlightH11Halogen
    Fog LightH10 or H16Halogen (varies by bumper/trim)
    DRLPSX24W (integrated with turn signal on some trims)Halogen (or LED on premium trims)
    Front Turn Signal3157NAKHalogen (or LED on premium trims)
    Rear Turn Signal1156 or LED (integrated)Halogen or LED
    Brake Light1157 or LED (integrated)Halogen or LED
    Tail Light1157 or LED (integrated)Halogen or LED
    Reverse Light3157 atau LED (terintegrasi)Halogen atau LED
    License Plate194Halogen
    Side Marker194Halogen
    Dome/Map Light578 (festoon) atau LEDHalogen atau LED (tergantung paket)

    The 2021 Kenworth W900, a legendary workhorse, offers various lighting configurations depending on trim levels and optional packages. While many W900 models come equipped with traditional halogen lighting as standard, premium packages and newer specifications may feature integrated LED lighting systems for certain functions. This guide focuses on the most common bulb sizes for the 2021 model year.

    For headlights, the vast majority of 2021 Kenworth W900 trucks utilize H11 bulbs for both low beam and high beam functions. This is a common setup designed for reliability and ease of replacement. Fog lights can vary, with some W900s using H10 and others H16, depending on the bumper design and trim level. It's advisable to visually inspect your current fog lights or consult your owner's manual to confirm the correct size.

    Daytime Running Lights (DRLs) on the W900 can be integrated with the front turn signals on some configurations, often using a PSX24W bulb in halogen form. However, higher trim levels may feature dedicated LED DRL strips. Front turn signals commonly use a 3157NAK amber halogen bulb, though, again, LED options are available for premium packages.

    The rear lighting on the Kenworth W900 often features a combination of functionality. Rear turn signals, brake lights, and tail lights are frequently integrated into single units. While some models may use 1156 (single filament) or 1157 (dual filament) halogen bulbs for these functions, many 2021 W900s, especially with popular optional packages, utilize integrated LED clusters that are not individual replaceable bulbs. Reverse lights often use 3157 halogen bulbs or are part of an LED assembly.

    Smaller exterior lights like license plate and side marker lights typically use the ubiquitous 194 wedge-style halogen bulb. For interior lighting, dome and map lights often use a 578 festoon-style bulb in halogen form, but many W900s now offer factory LED interior lighting packages for improved brilliance and longevity.

    LED vs Halogen Upgrade Considerations

    Upgrading from halogen to LED bulbs in your 2021 Kenworth W900 can offer significant benefits, including brighter light output, longer lifespan, and a more modern appearance. However, there's a few key considerations to keep in mind, especially for commercial vehicles.

    CANBUS Errors: Modern trucks like the W900 often employ a CANBUS (Controller Area Network Bus) system that monitors electrical circuits. Halogen bulbs draw more power than most LED equivalents. When you replace a halogen bulb with an LED, the lower power draw can be interpreted by the CANBUS system as a "bulb out" error, triggering a warning light on your dashboard. To prevent this, you'll typically need to install CANBUS-compatible LED bulbs or use load resistors (also known as decoders) in conjunction with standard LED bulbs. Load resistors trick the CANBUS system into thinking a standard halogen bulb is still in place by mimicking the electrical resistance.

    Adapters Needed: Some LED bulbs, particularly those designed for headlights, may have larger heatsinks or different wiring connectors than their halogen counterparts. You might need specific adapters or modifications to properly fit them into the W900's housings. Always check the physical dimensions of the LED bulb against the available space in your light assembly.

    Beam Pattern: Especially for headlights, not all LED bulbs are created equal. Poorly designed LED replacement bulbs can create a scattered or non-focused beam pattern, reducing visibility for you and potentially blinding oncoming drivers. Look for LED bulbs that mimic the filament placement of the original halogen bulb to ensure a proper beam pattern. Projector-style headlamps, if equipped on a W900, generally work better with LED upgrades than reflector housings.

    How to Replace Each Bulb

    Replacing bulbs on a Kenworth W900 is generally straightforward, but access can sometimes be a challenge due to the truck's robust construction.

    • Headlights (Low/High Beam): Access is usually from the front of the engine bay. You'll typically remove a dust cap, disconnect the electrical connector, and then unclip or twist to release the bulb. Be careful not to touch the glass of new halogen bulbs with bare hands, as oils can create hot spots and shorten bulb life.
    • Fog Lights: These are often accessed from underneath the front bumper or by reaching through the wheel well. You may need to remove a few screws or clips to gain access to the back of the fog light housing.
    • DRL/Front Turn Signal: Access is usually from the front behind the grille or within the headlight assembly. Twist the socket counter-clockwise to remove.
    • Rear Turn Signal, Brake, Tail, Reverse: Access to these can range from removing the entire tail light assembly (usually held in by a few bolts) to twisting individual bulb sockets out from the rear of the housing. For integrated LED units, replacement often means replacing the entire assembly.
    • License Plate Lights: These are typically small housings on the rear of the truck. You usually remove a couple of screws to open the housing and replace the wedge bulb.
    • Side Markers: Similar to license plate lights, these are small housings. Often, you can pry off the lens or twist out the socket from the back.
    • Dome/Map Lights: For interior lights, you typically use a small trim removal tool or a flathead screwdriver to carefully pry off the clear lens cover. The festoon or wedge bulb will then be accessible.

    Common Lighting Issues for This Generation

    For the 2021 Kenworth W900, while renowned for its durability, some common lighting issues can arise, often related to the demanding environment of commercial trucking.

    Vibration-Related Failures: Constant vibration and road shock inherent to long-haul trucking can shorten the lifespan of traditional halogen bulbs. Filaments can break prematurely, leading to frequent replacements. This is one of the primary reasons many operators consider LED upgrades.

    Corrosion in Sockets: Exposure to road salt, moisture, and grime can lead to corrosion in bulb sockets, especially for exterior lights. This corrosion can cause intermittent lighting, dim bulbs, or complete failure. Cleaning the sockets with electrical contact cleaner and applying dielectric grease during bulb replacement can help mitigate this.

    Wiring Harness Issues: Over time, wiring harnesses can experience chafing, breaks, or shorts due to vibration or improper routing. This can lead to various lighting malfunctions. Diagnosing these requires checking continuity and voltage at different points in the circuit.

    CANBUS System Sensitivity: As mentioned earlier, if aftermarket bulbs are installed without proper CANBUS correction, "bulb out" warnings can become a persistent nuisance, even if the lights are functioning. This isn't a failure of the lights themselves but rather a system misinterpretation.

    Integrated LED Unit Failures: While generally very reliable, if an integrated LED tail light, DRL, or headlight assembly fails, it often means replacing the entire expensive unit rather than just an individual bulb. This is a trade-off for the increased longevity and brightness of LED technology.

    Find a trusted shop on Repairius.

    Need service on your Kenworth W900?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2021 Kenworth W900

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Key Fob Programming

    DIY programming steps, FCC ID, fob PN, battery, transponder.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-06-23.

    Driving or Managing a Fleet?

    Use Dispatchtool for truck navigation, driver communication, dispatching, and fleet management.

    Visit Dispatchtool
    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email