Working on this vehicle? Write estimates, send inspections & invoice customers from your phone.

    Start 14-Day Free Trial
    ← All vehicle specs
    Key Fob Programming

    2021 Kenworth W900 — Key Fob Programming

    DIY steps, programming paths, batteries, and buying guide

    Working on this 2021 Kenworth W900? Run just this one job through Repairius.

    No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.

    14-day free trial · credit card required · cancel anytime

    Quick reference

    ItemDetail
    FCC IDNot standardized for the W900; verify by VIN and by reading the label inside your existing remote. Do not guess.
    OEM Fob PNVIN-specific from Kenworth/PACCAR. Have your VIN ready and request the remote part number from a Kenworth parts counter.
    Aftermarket OptionsDepends on the keyless module installed. If truck has an add-on/keyless module (e.g., Code Alarm/Prestige/DEI), match the remote to that module’s FCC ID/model. If factory-integrated, OEM is typically required.
    Battery TypeVaries by remote. Many use a CR2032 coin cell, but open your fob to confirm.
    Programmable On-Board?Typically no for factory-integrated systems (requires dealer/locksmith with PACCAR ESA or equivalent). Some dealer-installed/aftermarket alarm modules support an on-board procedure via a valet/program button.
    Cuts Required?If replacing a mechanical key blade, cutting to your truck’s key code is required. The remote itself does not require cutting. Most W900 keys are non‑transponder, but verify by VIN.

    Step-by-step on-board programming

    2021 Kenworth W900 trucks do not have a single universal DIY procedure. What you can do depends on how your keyless entry was equipped:

    • Factory-integrated keyless (via the body/multiplex controller): On-board DIY programming is not supported. Remotes are enrolled with a scan tool (PACCAR ESA or equivalent) by a dealer or a heavy-truck locksmith with the right software and credentials.
    • Dealer-installed or aftermarket alarm/keyless module (Code Alarm/Prestige/DEI/etc.): Many of these modules do support an on-board procedure using a hidden/program button (sometimes called a valet switch). The exact steps vary by module. A common pattern looks like this:
    1. Sit in the truck with all doors closed. Insert key and turn ignition ON (do not start).
    2. Locate the module’s program/valet button (usually under the dash, kick panel, or behind the knee bolster).
    3. Press and hold the button until the locks cycle or the LED indicates program mode (about 5–10 seconds).
    4. Release the button, then press the LOCK button on the new remote for 1–2 seconds. The locks should cycle to confirm learn.
    5. Program additional remotes now by pressing LOCK on each within 10 seconds.
    6. Turn ignition OFF to exit programming. Test all remotes.

    Important: These steps are generic to many aftermarket modules and will not work on a factory-integrated system. If you do not see a separate keyless/alarm module or program button, plan on dealer/locksmith programming.

    Battery replacement

    • Tools: Small flat screwdriver or plastic pry tool, and a fresh coin cell (confirm type by opening your fob—often CR2032).
    • Steps:
    1. Open the fob case carefully at the seam. Many remotes have a small notch for prying.
    2. Note the battery orientation (+/–).
    3. Slide out the old coin cell and install the new one without touching the faces with bare fingers (use gloves or clean tissue).
    4. Snap the shell back together and test range/operation.

    Tip: If range is weak after replacement, check that the contacts are not bent and that the battery is fully seated.

    Where to buy a replacement fob

    • Kenworth dealer: Best option to identify the correct OEM remote by VIN and to handle programming on factory systems. Expect roughly $140–$300 for the fob plus $120–$180 for programming, though pricing varies by region. Pros: guaranteed part match, software access. Cons: higher cost, scheduling.
    • Heavy-truck/mobile locksmith: Many can program PACCAR systems or install/program compatible aftermarket remotes. Typical programming labor runs $90–$200; part cost depends on OEM vs aftermarket. Pros: mobile convenience, competitive pricing. Cons: availability varies by area.
    • Online marketplaces (Amazon/eBay): Can be cost-effective ($20–$80), but only if you precisely match the FCC ID and/or OEM PN from your existing remote or module label. Pros: low price. Cons: risk of wrong remote or refurbished units; you’ll still need programming for factory systems.

    If on-board programming isn't supported

    For factory-integrated keyless on a 2021 W900, plan on professional programming. The body controller stores remote IDs and typically requires PACCAR ESA or similar software with security access. Bring:

    • VIN and proof of ownership
    • All existing remotes (new programming can overwrite older slots)

    Cost expectations:

    • Dealer: $200–$450 total (remote + programming).
    • Locksmith: $120–$300 total depending on part source and travel.
    • DIY: Battery swaps are DIY-friendly (<$10). Full DIY programming is only realistic if your truck has an aftermarket/keyless module that supports a valet-button learn mode.

    Immobilizer/transponder note: Most North American W900 applications use a conventional, non‑transponder mechanical key for the door/ignition, and the remote only controls locks/alarm. Fleets may spec aftermarket immobilizers or telematics; verify by VIN or ask the dealer. If your key has a visible chip head or a molded, branded transponder, cutting and electronic coding may both be required.

    Find a mobile locksmith or shop on Repairius.

    Need service on your Kenworth W900?

    Your vehicle and question are already filled in — just add your location.

    More specs for the 2021 Kenworth W900

    Oil Capacity & Filter

    Capacity, weight, filter PN, drain plug torque, change interval.

    Fluid Type Specs

    Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.

    Coolant Capacity & Type

    Total system capacity, OEM coolant spec, flush interval, bleed tips.

    Transmission Fluid & Service

    Trans model, fluid spec, capacity, filter PN, service interval.

    Torque Specifications

    Lug nuts, drain plug, caliper, axle nut, plug, key fasteners.

    Brake Pad & Rotor Specs

    Pad PNs, rotor size, min thickness, caliper torque.

    Tire Size & Pressure

    OEM size, cold psi, bolt pattern, wheel size, TPMS.

    Battery Size & Group

    Group size, CCA, AGM/flooded, dimensions, reset note.

    A/C Refrigerant & Oil

    R-134a or R-1234yf, charge oz, PAG oil spec.

    Bulb Sizes (Headlight, Tail, Fog)

    Headlight, fog, tail, turn, reverse, interior.

    Factory Maintenance Schedule

    Service intervals by mileage, severe-duty notes, known issues.

    Towing Capacity & Payload

    Max tow, payload, GVWR/GCWR, hitch class by trim.

    Fuse Box Diagram & Amperage

    Fuse box locations, layout, amps, and what each fuse controls.

    Serpentine Belt Routing & Length

    Belt routing, length, rib count, OEM + aftermarket PNs.

    Wheel Alignment Specifications

    Camber, caster, toe ranges (front & rear), adjustability notes.

    Paint Color Codes

    All factory colors with paint codes, sticker location, touch-up tips.

    Wiper Blade Sizes

    Driver/passenger/rear blade size, attachment, OEM + cross-refs.

    Spark Plug Type & Gap

    Plug PN, gap, torque, interval by engine.

    Transmission & Axle Gear Ratios

    Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.

    Same spec — other model years

    Maintenance & repair guides

    Browse by make

    Running an auto or diesel repair shop?

    Compare Repairius to the shop software you're paying for

    $99.99/month (first location included), unlimited users, 14-day free trial.

    Values can vary by engine, trim and build date; check your VIN-specific service information. Updated 2026-10-08.

    Driving or Managing a Fleet?

    Use Dispatchtool for truck navigation, driver communication, dispatching, and fleet management.

    Visit Dispatchtool
    Run your shop from estimate to payment

    Don't overhaul your shop. Test Repairius on your next job.

    Repairius keeps estimates, work orders, real-time job assignment, customer and vehicle history, inventory, and payments in one place — on desktop and in your pocket.

    14-day free trial · credit card required · cancel anytime

    Not a mechanic? Send Repairius to your shop — they can run estimates, jobs, and invoices in one place.

    Know someone who needs this?

    Share this page with a mechanic, a shop owner, or a friend working on the same problem.

    Know a mechanic or shop owner Repairius could help?

    Send them Repairius in one tap. Free listing, online booking, reminders and the full shop workflow.

    Text them Email