2022 Nissan Altima — Wiper Blade Sizes

Quick reference

Best aftermarket replacements

• Bosch ICON (beam) — premium, about $28–$35 each. Sizes: 26 in driver, 17 in passenger (often labeled 26A and 17A).
• Rain-X Latitude (beam) — mid to premium, about $20–$28 each. Sizes: 26 in and 17 in.
• Trico Force (beam) — mid-tier, about $18–$26 each. Sizes: 26 in and 17 in.
• Michelin Stealth Ultra (hybrid) — mid-tier, about $18–$26 each. Sizes: 26 in and 17 in.
• PIAA Si-Tech (beam, silicone) — premium, about $30–$40 each. Sizes: 26 in and 17 in.

Any of the above will fit the Altima’s J-hook arm when configured with the included hook adapter. Choose beam or hybrid styles for the best all-weather performance and reduced wind lift at highway speeds.

Attachment style

The 2022 Nissan Altima uses the common J-hook wiper arm (9x3 mm). This is the simplest, most widely supported connector. Most modern beam and hybrid blades ship with a preinstalled hook adapter; if the blade arrives with a different adapter attached, swap to the J-hook insert provided in the box. A small number of aftermarket “multi-adapter” blades may mention push-button or side pin connectors—those are not used on the Altima but are included for compatibility with other vehicles.

How to install

1. Park the car, turn off the ignition, and lift the wiper arm away from the windshield until it locks upright. Place a towel on the glass as a safety precaution.
2. On the old blade, locate the release tab where the arm’s hook meets the blade. Press the tab and slide the blade down toward the arm’s base to unhook it, then pull it off.
3. Prepare the new blade with the J-hook adapter (9x3). Align the arm’s hook with the blade’s mounting channel.
4. Slide the hook into the channel and pull upward until it clicks firmly into place. Tug gently to confirm it’s locked.
5. Lower the arm carefully back onto the windshield. Repeat for the passenger side.
6. Test the wipers with washer fluid to verify smooth, quiet operation.

Note: If your replacement blade uses a universal head that looks different, refer to the brand’s instruction leaflet for the J-hook configuration. If your Altima somehow has an unusual arm (rare), choose a blade kit that includes push-button or side pin adapters and follow that specific procedure.

When to replace

• Interval: every 6–12 months, or sooner in extreme heat, cold, or sun exposure.
• Signs it’s time: streaking, chattering, skipping, smearing, noisy operation, cracked or torn rubber, or a bent blade.
• Tip: Replacing blades in pairs ensures even, quiet wiping and clear visibility in all conditions.

Need wipers swapped fast? Find a shop on Repairius.