2024 Nissan Altima — Tire Size & Pressure Specs

Here is your complete guide to the tire and wheel specifications for the 2024 Nissan Altima. Whether you are patching a flat, mounting a fresh set of rubber, or just checking your cold tire pressures as the seasons change, having the right factory specs is critical for safety, ride comfort, and fuel efficiency.

Quick answer: 2024 Nissan Altima Specs

• OEM tire sizes: 215/60R16, 215/55R17, or 235/40R19 (depending on trim level)
• Recommended cold tire pressure: 32 PSI front / 32 PSI rear (for 16" and 17" wheels), 33-34 PSI front/rear (for 19" wheels). Always verify with your driver’s side door jamb placard.
• Bolt pattern: 5x114.3 mm (5x4.5")
• Wheel sizes: 16x7J, 17x7.5J, or 19x8J
• Load index/Speed rating: 95H (16"), 94V (17"), 96V XL (19")
• Spare tire size: T135/90D16 or T135/70D16 (compact temporary spare)
• TPMS frequency: 433 MHz

Tire sizes by trim

Nissan equips the 2024 Altima with three different tire and wheel configurations depending on the trim package you select. The sporty SR trims and luxury-focused SL get low-profile 19-inch wheels, while the S and SV trims prioritize ride comfort and sidewall flex.

(Note: Altima models equipped with Intelligent All-Wheel Drive (AWD) use the same tire sizes and pressures as their FWD counterparts.)

Recommended replacement tires

If your 2024 Altima is ready for new tread, we recommend prioritizing all-season touring tires that maximize tread life and minimize road noise. Here are a few top technician picks:

• Premium Tier ($$$): Michelin Defender 2 An industry benchmark for treadwear and quiet highway cruising. Excellent for the 16" and 17" wheel sizes.
• Mid-Range Tier ($$): Continental TrueContact Tour Provides superior wet braking and fuel efficiency (thanks to low rolling resistance) at a slightly lower price point than the Michelins.
• Budget Tier ($): General AltiMAX RT45 A fantastic value pick that offers reliable all-season traction, built-in visual alignment indicators, and respectable longevity.
• Performance/Sport (For SR 19" wheels): Pirelli P Zero All Season Plus If you have the SR VC-Turbo and want to take advantage of its handling dynamics, these tires offer sharper turn-in without sacrificing daily drivability.

When to inflate to max load psi

Note: Max load inflation guidelines generally apply to Heavy Duty (HD) trucks used for towing or hauling heavy payloads.

Because the 2024 Nissan Altima is a midsize passenger sedan, you should never inflate the tires to the "Max Press" listed on the tire's sidewall (which is often 44 or 51 PSI). Overinflating your Altima’s tires to this level will result in a harsh ride, premature center tread wear, and a reduced contact patch that severely compromises braking and handling. Always stick to the 32–34 PSI recommended on the door placard, even if you have a full car of passengers and luggage.

Lug nut torque & pattern

Proper wheel installation is vital to prevent brake rotor warping and wheel off conditions.

• Bolt Pattern: 5x114.3 mm (5x4.5")
• Lug Nut Size: M12 x 1.25 thread pitch
• Lug Nut Torque: 83 lb-ft (113 Nm)

Always use a calibrated torque wrench and tighten the lug nuts in a classic 5-lug "star" or crisscross pattern to ensure even seating against the hub.

Common tire issues for this vehicle

• Pothole Damage on 19-inch Wheels: The SR and SL trims use 235/40R19 tires. The "40" aspect ratio means the sidewall is quite short. This leaves the tire and the aluminum wheel highly susceptible to pinch flats, sidewall bubbles, and bent rims from potholes. Maintain exact tire pressures to give the wheel maximum protection.
• Uneven Rear Wear (Camber): Nissan sedans with independent rear suspensions can occasionally settle or fall out of alignment, leading to slight negative camber. This can cause the inside shoulder of the rear tires to wear faster. Rotating your tires every 5,000 to 7,500 miles and getting an annual four-wheel alignment will keep this in check.
• TPMS Sensor Syncing: The 2024 Altima uses a 433 MHz direct TPMS system. When installing new sensors, they generally require an OBD-II relearn tool to pair with the vehicle's computer. Simple tire rotations, however, are usually auto-learned by the system after a few miles of driving.

Need new tires? Find a trusted shop on Repairius.