2025 Nissan Altima Torque Specifications Guide
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2025 Nissan Altima? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
2025 Nissan Altima Torque Specifications
Ensuring proper torque on critical fasteners is paramount for the safety, reliability, and longevity of your 2025 Nissan Altima. This guide provides essential torque specifications for common maintenance and repair tasks.
Quick reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel Lug Nuts | 80-90 ft-lb / 108-122 Nm | Refer to OEM for exact specification |
| Engine Oil Drain Plug | 25-30 ft-lb / 34-41 Nm | Generally applicable, verify with OEM |
| Transmission Drain Plug | 22-29 ft-lb / 30-39 Nm | Automatic Transmission; always refer to OEM |
| Front Brake Caliper Bracket Bolts | 85-100 ft-lb / 115-136 Nm | |
| Rear Brake Caliper Bracket Bolts | 45-55 ft-lb / 61-75 Nm | |
| Front Brake Caliper Slide Pins | 20-25 ft-lb / 27-34 Nm | Ensure pins move freely after torquing |
| Rear Brake Caliper Slide Pins | 18-24 ft-lb / 24-33 Nm | Ensure pins move freely after torquing |
| Front Axle Nut | 160-175 ft-lb / 217-237 Nm | Use a new nut, stake or crimp as per OEM |
| Rear Axle Nut | 140-155 ft-lb / 190-210 Nm | If applicable; use a new nut, stake or crimp as per OEM |
| Spark Plugs | 18-20 ft-lb / 24-27 Nm | For 4-cylinder gasoline engines |
| Valve Cover Bolts | 70-90 in-lb / 8-10 Nm | Torque in sequence to prevent warping |
Wheel lug torque pattern
For the 2025 Nissan Altima, a star pattern (also known as a cross-pattern) should be used when tightening wheel lug nuts. This ensures even pressure distribution around the wheel hub, preventing warping of the brake rotor or wheel, and ensuring the wheel is properly seated. Tighten each lug nut incrementally until the final torque specification is reached.
Brake torque notes
When working on the braking system, cleanliness is critical. Ensure all mating surfaces are free of rust, dirt, and old threadlocker. Use a high-quality threadlocker on caliper bracket bolts where specified by the OEM. Never re-use axle nuts; always replace them with new ones and follow the OEM procedure for staking or crimping to prevent loosening. For caliper slide pins, apply a high-temperature silicone-based lubricant to ensure smooth operation and prevent seizing.
Why torque matters
Proper fastener torque is essential for several reasons:
- Safety: Under-torqued fasteners can loosen, leading to catastrophic failure, such as a wheel detaching from the vehicle. Over-torqued fasteners can stretch or break, leading to similar failures, and can also damage the threads in the component they are fastening.
- Reliability: Correct torque ensures components are securely held in place, preventing premature wear, vibration, and leaks.
- Performance: Consistent torque on components like spark plugs impacts engine performance and fuel efficiency. Properly torqued brake components ensure optimal braking effectiveness and reduce uneven pad wear.
- Component Longevity: Fasteners torqued to specification reduce stress on parts, extending their lifespan and preventing costly repairs.
Always use a calibrated torque wrench and follow the manufacturer's recommended procedures. Torque specifications are designed to achieve a specific clamping force, which is vital for the integrity of the assembly.
Disclaimer: The torque specifications provided in this guide are for reference purposes only. While every effort has been made to ensure accuracy, manufacturer specifications can vary by trim, engine, and specific vehicle configuration. Always consult the official 2025 Nissan Altima factory service manual or a reputable OEM data source for the most precise and up-to-date information for your specific vehicle. Critical fasteners should always be double-checked against the OEM service manual before final assembly.
Find a trusted shop on Repairius.
More specs for the 2025 Nissan Altima
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2025 Nissan Altima Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.