2015 Nissan Frontier Torque Specifications
Key fastener torque specifications for the 2015 Nissan Frontier, including brakes, wheels, and engine components.
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2015 Nissan Frontier? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel lug nuts | 98 ft-lb / 133 Nm | |
| Oil drain plug | 25 ft-lb / 34 Nm | |
| Automatic transmission drain plug | 25 ft-lb / 34 Nm | |
| Front brake caliper bracket bolts | 95-105 ft-lb / 129-142 Nm | Varies by 2WD/4WD |
| Front brake caliper slide pins | 26-34 ft-lb / 35-46 Nm | |
| Rear brake caliper bracket bolts | 48-52 ft-lb / 65-71 Nm | If equipped with rear disc brakes |
| Rear brake caliper slide pins | 18-22 ft-lb / 24-30 Nm | If equipped with rear disc brakes |
| Front axle nut | 100-110 ft-lb / 136-149 Nm | |
| Spark plugs | 18-22 ft-lb / 24-30 Nm | V6 engine |
| Valve cover bolts | 6-8 ft-lb / 8-11 Nm | In sequence |
| Intake manifold bolts | 8-10 ft-lb / 11-14 Nm | In sequence |
Wheel lug torque pattern
When tightening the wheel lug nuts on your 2015 Nissan Frontier, it is crucial to use a star or cross pattern. This ensures that the wheel is seated evenly against the hub, preventing warping of the brake rotor and ensuring a safe connection. Start with one lug nut, then tighten the one most directly opposite it. Continue this pattern until all lug nuts are tightened to the initial snug-fit, then repeat the pattern to bring them to their final torque specification.
Brake torque notes
The torque specifications for brake components are critical for safe and effective braking. The caliper bracket bolts, which hold the caliper assembly to the knuckle, require a significantly higher torque than the caliper slide pins. The slide pins allow the caliper to move freely, and over-torquing them can cause the brakes to bind. Always use a torque wrench and follow the specified values. If your Frontier has rear disc brakes, be sure to use the correct torque for the rear components, as they differ from the front.
Why torque matters
Using a calibrated torque wrench is one of the most important aspects of vehicle maintenance and repair. Overtightening a fastener can stretch the threads and damage the component, leading to premature failure. Undertightening can allow the fastener to loosen over time, which can have catastrophic consequences, especially with critical components like wheels and brakes. Following the manufacturer's torque specifications ensures that each fastener is properly loaded, providing a secure and reliable connection.
Disclaimer: The information on this page is for general reference only. Critical fasteners should always be verified in the OEM service manual for your specific vehicle configuration.
Find a trusted shop on Repairius.
More specs for the 2015 Nissan Frontier
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2015 Nissan Frontier Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.