2020 Nissan Frontier Torque Specifications
AI-generated reference. Always verify torque values, fluid capacities, intervals, and procedures against the manufacturer's service manual or OEM repair information before performing work. Repairius is not liable for damage from acting on this content without verification.
Working on this 2020 Nissan Frontier? Run just this one job through Repairius.
No big switch. Write the estimate, text it for approval, and get paid on your phone. Keep everything else the way it is.
14-day free trial · credit card required · cancel anytime
Quick reference
| Fastener | Torque (ft-lb / Nm) | Notes |
|---|---|---|
| Wheel Lug Nuts | 98-105 / 133-142 | |
| Oil Drain Plug | 25 / 34 | |
| Transmission Drain Plug | 25 / 34 | |
| Front Brake Caliper Bracket Bolts | 130 / 176 | |
| Front Brake Caliper Slide Pins | 24 / 32 | |
| Rear Brake Caliper Bracket Bolts | 48 / 65 | |
| Rear Brake Caliper Slide Pins | 18 / 24 | |
| Axle Nut | 104 / 141 | |
| Spark Plugs | 18 / 24 | |
| Valve Cover Bolts | 6-7 / 8-9.5 | In sequence |
| Intake Manifold Bolts | 12-14 / 16-19 | In sequence |
Wheel lug torque pattern
When tightening the wheel lug nuts on your 2020 Nissan Frontier, it is crucial to follow a "star" or "cross" pattern. This ensures the wheel is seated evenly against the hub, preventing vibration and ensuring safety. Start with one lug nut, then tighten the one most directly opposite it. Continue this pattern until all lug nuts are tightened to the initial snug-fit. Then, repeat the pattern, torquing each nut to the final specification.
Brake torque notes
Properly torquing brake components is critical for safety. The brake caliper bracket bolts are a high-torque fastener and should be clean and dry before installation. Do not apply any thread locker unless specified by the manufacturer. The brake caliper slide pins should be lubricated with a high-temperature silicone-based brake grease to ensure the caliper can move freely. Ensure no grease comes into contact with the braking surfaces.
Why torque matters
Using a calibrated torque wrench is one of the most important aspects of any automotive repair. Overtightening a fastener can stretch the threads, leading to damage or failure. Undertightening can cause components to loosen over time, which can be catastrophic, especially with critical suspension and brake parts. Always use a torque wrench and follow the manufacturer's specifications to ensure a safe and reliable repair.
Disclaimer: The torque specifications provided in this article are for general reference only. Critical fasteners should always be verified in the OEM service manual for your specific vehicle before any work is performed.
Find a trusted shop on Repairius.
More specs for the 2020 Nissan Frontier
Oil Capacity & Filter
Capacity, weight, filter PN, drain plug torque, change interval.
Fluid Type Specs
Engine oil, coolant, ATF, diff, brake, PS, DEF — with OEM spec numbers.
Coolant Capacity & Type
Total system capacity, OEM coolant spec, flush interval, bleed tips.
Transmission Fluid & Service
Trans model, fluid spec, capacity, filter PN, service interval.
Brake Pad & Rotor Specs
Pad PNs, rotor size, min thickness, caliper torque.
Tire Size & Pressure
OEM size, cold psi, bolt pattern, wheel size, TPMS.
Battery Size & Group
Group size, CCA, AGM/flooded, dimensions, reset note.
A/C Refrigerant & Oil
R-134a or R-1234yf, charge oz, PAG oil spec.
Bulb Sizes (Headlight, Tail, Fog)
Headlight, fog, tail, turn, reverse, interior.
Factory Maintenance Schedule
Service intervals by mileage, severe-duty notes, known issues.
Towing Capacity & Payload
Max tow, payload, GVWR/GCWR, hitch class by trim.
Fuse Box Diagram & Amperage
Fuse box locations, layout, amps, and what each fuse controls.
Serpentine Belt Routing & Length
Belt routing, length, rib count, OEM + aftermarket PNs.
Wheel Alignment Specifications
Camber, caster, toe ranges (front & rear), adjustability notes.
Paint Color Codes
All factory colors with paint codes, sticker location, touch-up tips.
Wiper Blade Sizes
Driver/passenger/rear blade size, attachment, OEM + cross-refs.
Spark Plug Type & Gap
Plug PN, gap, torque, interval by engine.
Transmission & Axle Gear Ratios
Trans gear ratios, axle ratios, RPO codes, tow vs MPG impact.
Key Fob Programming
DIY programming steps, FCC ID, fob PN, battery, transponder.
Same spec — other model years
Maintenance & repair guides
2020 Nissan Frontier Maintenance Schedule →
Available maintenance guidance; confirm the manufacturer schedule.
Repair planning references →
Plan the scope of work; detailed procedures need configuration-matched evidence.
Browse by make
Running an auto or diesel repair shop?
Compare Repairius to the shop software you're paying for
$99.99/month (first location included), unlimited users, 14-day free trial.