2016 Nissan Rogue Coolant Capacity & Type

The 2016 Nissan Rogue cooling system holds approximately 7.2 to 7.7 quarts (6.8 to 7.3 liters) of coolant, depending on the engine and specific configuration.

Quick Answer

• Total Cooling System Capacity: 7.2 - 7.7 quarts (6.8 - 7.3 liters)
• OEM Coolant Spec: Nissan Long Life Coolant / Nissan Genuine Anti-freeze/Coolant (Blue, Ethylene Glycol-based, Phosphate-type OAT or Hybrid OAT) L250 Anti-freeze Coolant, typically pre-diluted 50/50.
• Mix Ratio: 50/50 pre-mix or concentrate diluted to 50/50 with distilled water.

Capacity by Engine Option

2.5L QR25DE Engine (FWD & AWD)

Flush Interval

Nissan recommends the following coolant flush intervals for the 2016 Rogue:

• Normal Duty: Replace initially at 105,000 miles or 84 months, then every 75,000 miles or 60 months thereafter.
• Severe Duty: If operating under severe conditions (e.g., extensive towing, dusty conditions, extreme temperatures), it's advisable to inspect the coolant more frequently and consider replacing it sooner, typically around 60,000 miles or 48 months.

Always refer to your vehicle's owner's manual for the most accurate and up-to-date maintenance schedule.

How to Refill & Bleed

Refilling and bleeding the cooling system on a 2016 Nissan Rogue is crucial to prevent air pockets that can lead to overheating. Here's a general procedure:

1. Safety First: Ensure the engine is completely cool before starting. Wear appropriate safety gear, including gloves and eye protection.
2. Drain Old Coolant: Place a drain pan under the radiator drain plug. Open the drain plug and the radiator cap to allow the coolant to flow out. For a more thorough drain, you may also need to open drain plugs on the engine block if present (consult a service manual).
3. Flush (Optional but Recommended): Once drained, close the radiator drain and fill the system with distilled water. Run the engine with the heater on high until it reaches operating temperature. Drain the water. Repeat this process until the drained water is clear. (Do not use tap water).
4. Refill with New Coolant: Close all drain plugs. Slowly add new, recommended 50/50 pre-mixed Nissan Long Life Coolant to the radiator until it's full. Fill the reservoir to the "MAX" line.
5. Bleed the System: This is critical. Start the engine with the radiator cap off. Turn the heater to its maximum heat setting and fan speed. Let the engine idle. As the engine warms up, air bubbles will escape through the radiator opening. You may need to gently squeeze the upper and lower radiator hoses to help dislodge air pockets. Crucially, the 2016 Nissan Rogue often utilizes a self-bleeding system, but it's still important to monitor the coolant level carefully. Add coolant as needed to keep the radiator full.
6. Install Radiator Cap: Once the thermostat opens and the fan cycles on, and no more bubbles are visible, install the radiator cap.
7. Drive and Recheck: Drive the vehicle for a short period and then allow it to cool completely. Recheck the coolant level in the reservoir and top it off if necessary.

Common Cooling System Issues for this Generation (2014-2020 Nissan Rogue)

The 2016 Nissan Rogue, part of the second generation, can experience some common cooling system issues:

• CVT Overheating: The Continuously Variable Transmission (CVT) in this generation is known to generate significant heat. A faulty or clogged transmission cooler (which often routes through the main radiator) can lead to CVT overheating, which in turn can stress the engine cooling system. Symptoms include a "limp mode" and warning lights.
• Radiator Leaks: Over time, the plastic end tanks of the radiator can become brittle and crack, leading to coolant leaks. Damage from road debris can also cause leaks in the radiator fins.
• Water Pump Failure: The water pump can develop leaks or fail internally, leading to insufficient coolant circulation and subsequent overheating. Signs include coolant puddles under the vehicle or a whining noise from the engine compartment.
• Thermostat Issues: A stuck-open thermostat can cause the engine to run too cool, reducing fuel efficiency. A stuck-closed thermostat is more serious, leading to rapid overheating.
• Hose Leaks: Coolant hoses can degrade over time, leading to leaks, especially at connection points. Inspect hoses for cracks, bulges, or softness.
• Coolant Reservoir Leaks: The plastic coolant reservoir can also develop cracks or integrity issues, leading to a slow loss of coolant.

Regular cooling system maintenance, including adhering to recommended flush intervals and using the correct coolant type, is vital for preventing these issues and ensuring the longevity of your 2016 Nissan Rogue.

Find a trusted shop on Repairius.