2019 Nissan Rogue Bulb Sizes

Quick reference

The 2019 Nissan Rogue, a popular compact SUV, offers a variety of lighting options depending on the trim level. Understanding the specific bulb sizes for each application is crucial for both replacement and upgrading. This guide will detail the bulb sizes for common lighting applications, highlight differences between halogen and LED/HID options, and provide considerations for aftermarket upgrades.

For most S and SV trims, the Rogue came standard with halogen headlights. Higher trim levels, specifically the SL and some SV Premium packages, were often equipped with LED or HID (High-Intensity Discharge) projector headlights for the low beams, offering superior illumination and a distinct appearance. The HIDs will typically use a D3S bulb, while the full LED headlights are integrated units and not designed for bulb replacement.

The high beam bulbs are generally H9 for halogen-equipped models. Even with LED or HID low beams, the high beams often remain H9 halogen bulbs, though some premium LED headlight assemblies may feature integrated LED high beams.

Fog lights across all trims typically utilize an H11 halogen bulb, providing supplemental lighting in adverse weather conditions. Daytime Running Lights (DRLs) are predominantly LED, offering a modern look and improved daytime visibility. These are usually integrated into the headlight assembly and are not user-serviceable bulbs.

Incandescent bulbs are common for turn signals, brake lights, reverse lights, and interior lighting. The front and rear turn signals use a 7440A amber bulb, ensuring the correct color for signaling. The brake lights are a 7440 bulb (clear), while the tail lights are typically integrated LEDs for durability and efficiency. Reverse lights commonly use a 921 bulb. For license plate illumination and front side markers, a compact 168 bulb is used. Inside the cabin, the dome light often uses a DE3175 festoon-style LED bulb, and the map lights typically use a 168 bulb.

LED vs halogen upgrade considerations

Upgrading from halogen to LED bulbs in your 2019 Nissan Rogue can significantly enhance visibility and modern aesthetics. However, it's not always a straightforward swap. When replacing incandescent turn signals, brake lights, or reverse lights with LEDs, you might encounter CANBUS errors, such as hyper-flashing (rapid blinking) for turn signals or dashboard warning lights. This is because LEDs draw less power, and the vehicle's computer interprets the lower current draw as a burnt-out bulb.

To mitigate CANBUS errors, you will typically need to install load resistors or use CANBUS-compatible LED bulbs. Load resistors simulate the electrical resistance of traditional incandescent bulbs, tricking the vehicle's system into recognizing the LED as a correctly functioning bulb. Ensure any aftermarket LED kit explicitly states CANBUS compatibility for your 2019 Nissan Rogue to avoid these issues.

For low beam and high beam upgrades in halogen-equipped Rogues, consider the beam pattern. Aftermarket LED bulbs can sometimes create a scattered or unfocused light output in housings designed for halogen filaments, leading to glare for oncoming drivers. Opt for reputable brands that design their LED bulbs to mimic the incandescent filament's light projection as closely as possible, or consider projector-style LED retrofits for optimal performance.

How to replace each bulb

• Low Beam/High Beam: Access to these bulbs usually requires removing the wheel well liner or reaching through the engine bay, depending on the side. Twist the bulb counter-clockwise to remove.
• Fog Light: Access is typically from underneath the vehicle or by removing the plastic splash guard in the front bumper. Twist and pull to remove the bulb.
• Front Turn Signal: Often accessible by turning the steering wheel to gain access to the wheel well liner. Unclip the wiring harness and twist to remove.
• Rear Turn Signal/Brake Light/Reverse Light/Tail Light: These bulbs are typically accessed by opening the rear hatch and removing a few trim panels to expose the back of the taillight assembly. Twist sockets to release the bulbs.
• License Plate: Usually, two small screws hold the clear lens in place above the license plate. Remove these to access the bulb.
• Side Marker: Often accessible from the wheel well or by gently prying off the lens cover from the exterior.
• Dome/Map Light: Carefully pry off the translucent lens cover using a plastic trim tool. The bulbs are usually push-in or festoon style.

Common lighting issues for this generation

Owners of the 2019 Nissan Rogue occasionally report issues with premature halogen bulb failure, particularly for low beam headlights. This can be exacerbated by road vibrations or frequent daytime running light usage. Another common complaint for vehicles with integrated LED DRLs or taillights is the failure of individual LED segments. Since these are often integrated units, replacement can be more costly, requiring the entire assembly to be swapped.

Flickering headlights, especially with aftermarket HID or LED kits, can indicate an incompatible ballast or driver, or an insufficient power supply. Always ensure proper voltage and current stability when installing aftermarket lighting components to prevent these issues and ensure longevity.

Find a trusted shop on Repairius.