2019 Nissan Rogue Oil Capacity & Filter

The 2019 Nissan Rogue with the 2.5L QR25DE engine takes 4.8 quarts (4.5 liters) of 0W-20 synthetic oil.

Quick Answer

• Oil Capacity: 4.8 US Quarts (4.5 Liters)
• Recommended Oil Weight: 0W-20
• Oil Type Specification: API SN or later, ILSAC GF-5 or later
• OEM Oil Filter Part Number: 15208-9E000 (or consult dealer for the latest part number)
• Aftermarket Oil Filter Cross-References:
  • Fram: PH6607
  • Wix: 57356
  • Mobil 1: M1-110

Capacity by Engine Option

*Note: The 1.6L Turbo engine was available in the Rogue Sport, not the standard Rogue for 2019. This article focuses on the more common 2.5L engine in the standard 2019 Nissan Rogue.

Oil Change Interval

Nissan recommends the following oil change intervals for the 2019 Rogue (2.5L engine):

• Normal Duty: Every 5,000 miles (8,000 km) or 6 months, whichever comes first.
• Severe Duty: Every 3,750 miles (6,000 km) or 3 months, whichever comes first.

Severe duty conditions include frequent short trips, extensive idling, towing, driving in dusty conditions, or extreme temperatures. If you regularly operate your vehicle under these conditions, adhere to the severe duty schedule to ensure optimal engine protection and longevity.

Drain Plug Torque

The oil drain plug on the 2019 Nissan Rogue (2.5L engine) should be torqued to 25 ft-lbs (34 Nm). Always use a new crush washer with each oil change to ensure a proper seal and prevent leaks. The OEM crush washer part number is typically 11026-JA00A, but always consult your dealer for the most current information.

How to Change the Oil

Changing the oil on your 2019 Nissan Rogue is a straightforward process:

1. Gather Supplies: Ensure you have the correct oil, oil filter, drain pan, wrench for the drain plug, oil filter wrench, new crush washer, and funnel.
2. Warm Up Engine (Optional): Run the engine for a few minutes to warm the oil, which helps it drain more easily. Be cautious as hot oil can cause burns.
3. Lift and Secure: Safely lift the front of the vehicle using a jack and secure it with jack stands.
4. Locate Drain Plug: Place the drain pan beneath the oil pan, then carefully remove the drain plug using the appropriate wrench. Allow the old oil to drain completely.
5. Replace Drain Plug: Once drained, replace the drain plug with a new crush washer and torque it to 25 ft-lbs.
6. Remove Old Filter: Position the drain pan under the oil filter, then unscrew the old filter using an oil filter wrench. Be prepared for some oil to spill.
7. Install New Filter: Apply a thin coat of new oil to the rubber gasket of the new filter. Screw it on by hand until snug, then tighten an additional 3/4 to 1 full turn (or according to filter manufacturer's instructions).
8. Add New Oil: Lower the vehicle. Locate the oil filler cap on top of the engine and pour in the recommended amount of new oil.
9. Check Level: Start the engine and let it run for a minute to circulate the oil. Turn off the engine, wait a few minutes, then check the oil level with the dipstick. Add more oil if necessary.
10. Dispose of Old Oil: Properly dispose of your used oil and filter at an approved recycling center.

Common Issues / Tips for this Generation

• CVT Transmission Care: While not directly oil-related, the 2019 Nissan Rogue features a Continuously Variable Transmission (CVT). Regular powertrain maintenance, including timely oil changes, contributes to the overall health of the vehicle and the longevity of the CVT.
• Oil Consumption: Some Nissan QR25DE engines in certain model years have been known to exhibit higher-than-average oil consumption. While less prevalent in newer generations like the 2019 model, it's always a good practice to regularly check your oil level between changes.
• Proper OCI is Key: Sticking to the recommended oil change intervals, especially under severe driving conditions, is crucial for preventing sludge buildup and maintaining engine health in these vehicles.
• Use Full Synthetic: The 0W-20 requirement typically means a full synthetic oil. Using a high-quality full synthetic oil that meets API SN (or later) and ILSAC GF-5 (or later) standards is essential for the performance and longevity of your engine.

Need an oil change? Find a trusted shop on Repairius.