2018 Nissan Titan Fuse Box Diagram

Quick Answer

Your 2018 Nissan Titan has three primary fuse box locations:

• Under-Hood Fuse & Relay Box: Located in the engine compartment, near the battery on the passenger side.
• In-Cabin Fuse Box: Found behind a trim panel to the left of the steering column, near the driver's side kick panel.
• Terminal Fuse Box: A smaller box connected directly to the positive battery terminal.

Always consult the fuse legend printed on the inside of the fuse box lid or in your owner's manual to confirm fuse positions and ratings for your specific trim level.

Under-Hood Fuse & Relay Box

This is the main fuse box, containing higher-amp fuses and relays that control core vehicle functions. It's a black plastic box located on the passenger side of the engine bay.

Relay Locations (Under-Hood)

• A/C Relay: Controls the air conditioning compressor clutch.
• Ignition Relay: Powers ignition system components.
• Fuel Pump Relay: Activates the fuel pump.
• Starter Relay: Engages the starter motor when you turn the key.
• Blower Motor Relay: Powers the main fan for your climate control system.
• Trailer Tow Relays: Manages power distribution for trailer lighting.

In-Cabin Fuse Box (Driver's Side)

This fuse box handles most of the interior electronics and controls. It's located behind a small access door on the lower dashboard, to the left of the steering wheel.

How to Test a Fuse

Testing a fuse is a simple process. A "blown" fuse has a broken filament inside, interrupting the electrical circuit it was designed to protect.

1. Turn the vehicle off.
2. Locate the suspect fuse using the diagrams above and the legend on your fuse box cover.
3. Remove the fuse. A small fuse puller tool is often included in the fuse box, but needle-nose pliers will also work carefully.
4. Visually Inspect. Hold the fuse up to the light. Inside the plastic body is a small metal wire. If this wire is broken or looks melted, the fuse is blown.
5. Confirm with a Multimeter (Optional but Recommended). Set your multimeter to the continuity setting (it often looks like a sound wave symbol). Touch a probe to each metal blade on the fuse. If the multimeter beeps or reads close to zero ohms, the fuse is good. If it remains silent or reads "OL" (Over Limit), the fuse is blown.

If you find a blown fuse, replace it with a new one of the exact same amperage rating. Never use a higher-rated fuse, as this can cause a fire.

Common Blown Fuses on the 2018 Nissan Titan

While any fuse can blow, some are more common due to the nature of the circuits they protect.

• 12V Power Outlet / Cigar Lighter Fuses: This is the most common issue. It's usually caused by a faulty phone charger, a coin falling into the outlet, or a device that draws too much power. Before replacing the fuse, inspect the power outlet itself to ensure it is clear of any foreign objects.
• Trailer Tow Fuses: If your trailer lights aren't working, these fuses are the first place to look. Often, the issue is caused by faulty wiring on the trailer itself, which creates a short and blows the fuse in the truck. Inspect the trailer connector on both the truck and the trailer for corrosion or damage.
• Radio / Infotainment Fuse: If your radio suddenly won't turn on, check this fuse. While it can blow randomly, it sometimes happens after installing aftermarket audio equipment or if there is an internal fault in the head unit.
• Fuel Pump Fuse: If your Titan cranks but won't start, the fuel pump fuse (and relay) is a critical component to check. A blown fuse here could indicate a wiring issue or a failing fuel pump that is drawing too much current.

Find a trusted shop on Repairius.