2025 Nissan Titan Paint Color Codes & Touch-Up Guide

Whether you're fixing a minor scratch from a rogue shopping cart or doing a full bumper respray, having the exact factory paint code for your 2025 Nissan Titan is crucial for a flawless finish. The full-size Titan is known for its rugged capability and striking color palette, ranging from deep metallics to brilliant tri-coats.

In this comprehensive guide, we'll provide a quick reference to the factory paint codes for the 2025 Nissan Titan, show you exactly where to find your vehicle’s specific code, and share expert tips on touching up your paint like a pro.

Quick reference: 2025 Nissan Titan Paint Codes

Below is a quick reference table of the factory colors offered for the latest Nissan Titan models. Please note that availability may vary based on trim level (such as PRO-4X vs. Platinum Reserve).

If you are unsure of your exact color, always confirm via your VIN at a local Nissan dealer or auto paint supplier before ordering touch-up materials.

Where to find your paint code

Nissan makes it relatively straightforward to locate your vehicle's factory paint code.

1. Check the Driver's Side Door Jamb: Open the driver's door and look at the B-pillar (the frame pillar just behind where the front door latches).
2. Locate the Vehicle Certification Label: You are looking for a black and white (or sometimes silver) sticker that contains your VIN, tire pressure data, and weight ratings.
3. Find the "COLOR" Code: Look toward the bottom left or center of this sticker. You will see the word "COLOR" followed by a three-character alphanumeric code (e.g., "QAB" or "KAD"). There will also be a trim code right next to it, but the first three digits are your exterior paint code.

Best touch-up paint sources

Once you have your three-digit Nissan paint code, it’s time to source the paint. Depending on the size of the repair, you have several excellent options:

• Your Local Nissan Dealer: For the most accurate match on small rock chips, OEM touch-up pens and brush bottles from the parts department are hard to beat.
• AutomotiveTouchup: Highly recommended for larger repairs. They offer perfectly mixed aerosol spray cans, half-ounce bottles, and ready-to-spray pints/quarts for spray guns.
• Dupli-Color: A great, budget-friendly option available at most local auto parts stores. Their Scratch Fix All-in-1 tool includes an abrasive prep tip, paint, and clear coat in one convenient package.
• Tcoat Custom-Mix: For professional-grade repairs, specialized suppliers like Tcoat can mix custom batches based on your exact VIN and paint code, ensuring maximum accuracy.

How to use touch-up paint

Achieving a professional-looking repair takes a little patience and the right technique. Follow these steps for the best results:

1. Clean the Area: Wash the damaged area with soap and water, then wipe it down with a wax and grease remover or rubbing alcohol. There should be no dirt, rust, or wax left in the scratch.
2. Apply Primer (if needed): If the scratch goes all the way down to bare metal or plastic, apply a very thin layer of automotive primer. Let it dry completely.
3. Apply the Base Coat: Apply the color-matched base coat in thin, light layers. Do not try to fill the scratch in one go, or the paint will blob and run. Wait 10 to 15 minutes between coats until the color covers the primer fully.
4. Apply Clear Coat: The base coat provides the color, but the clear coat provides the gloss and UV protection. Once the base coat is dry (usually after 30-60 minutes), apply 2-3 thin layers of clear coat.

Color matching tips for pearls and tri-coats

Colors like Pearl White TriCoat (QAB) and Cardinal Red TriCoat (NBA) require a three-step painting process at the factory: a solid base coat, a translucent pearl mid-coat, and a protective clear coat.

• Test First: Always test your touch-up paint on a piece of scrap metal or cardboard first. Tri-coats are notoriously difficult to match because the final color depends heavily on the thickness of the mid-coat.
• Layer Carefully: Apply the base coat until the area is covered. Then, apply the pearl mid-coat one very light layer at a time. Compare it to the surrounding paint after each layer dries. Stop applying the mid-coat once the shimmer matches the factory finish.
• Blend the Edges: For spray can repairs on tri-coats, you may need to use a blending solvent to melt the edge of your new clear coat into the existing factory clear coat.

Touching up paint takes practice, and some damage is simply too large or complex for a DIY fix. If your Titan has suffered major scratches, dented panels, or peeling clear coat, it's time to call in the professionals. Find a trusted body shop on Repairius.